PartsTable
Technical Data Sheet
Download PDF

662064 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

662064: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 4.200 INCHES NOMINAL IN, first_leg_length: 0.720 INCHES NOMINAL IN, second_leg_style: CORNER RADIUS. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-412-3225, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
662064
NSN: 5340-00-412-3225
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL COMP 410
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width4.200 INCHES NOMINAL IN
first_leg_length0.720 INCHES NOMINAL IN
second_leg_styleCORNER RADIUS
second_leg_width4.200 INCHES NOMINAL IN
style_designatorOFFSET ANGLE
second_leg_length1.370 INCHES NOMINAL IN
first_leg_thickness0.059 INCHES NOMINAL IN
second_leg_thickness0.059 INCHES NOMINAL IN
second_leg_offset_angle5.0 DEGREES NOMINAL
NSN5340-00-412-3225
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 662064 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG WIDTH: 4.200 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 1.370 INCHES NOMINAL IN
•
STYLE DESIGNATOR: OFFSET ANGLE
•
FIRST LEG STYLE: SQUARE
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE
•
SECOND LEG THICKNESS: 0.059 INCHES NOMINAL IN
•
FIRST LEG THICKNESS: 0.059 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG WIDTH4.200 INCHES NOMINAL IN
SECOND LEG LENGTH1.370 INCHES NOMINAL IN
STYLE DESIGNATOROFFSET ANGLE
FIRST LEG STYLESQUARE
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5504 ASSN STD SINGLE MATERIAL RESPONSE
SECOND LEG THICKNESS0.059 INCHES NOMINAL IN
FIRST LEG THICKNESS0.059 INCHES NOMINAL IN
FIRST LEG LENGTH0.720 INCHES NOMINAL IN
FIRST LEG WIDTH4.200 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
662064R1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 662064?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 662064?
662064 is a BRACKET,ANGLE.
What parts can replace 662064?
There is 1 known substitute for 662064: 662064R1. Substitute compatibility should be verified for your specific system.
What is the NSN for 662064?
662064 is cataloged in the U.S. Government catalog under NSN 5340-00-412-3225. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 662064

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.