PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6611
6611 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CONNECTOR,PLUG,ELECTRICAL is a the manufacturer industrial component. Key specifications include color: BLACK, material: ALUMINUM ALLOY, tube_type: PENTODE, hole_depth: 1.750 INCHES NOMINAL IN, shaft_type: DRILLED RADIALLY, wheel_type: SOLID. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-489-4606, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6611
NSN: 5340-00-489-4606
FSC: 5340
CAGE: 06004 — STEWART-WARNER BASSICK CORP (USA)
SPECIFICATIONS
colorBLACK
materialALUMINUM ALLOY
tube_typePENTODE
hole_depth1.750 INCHES NOMINAL IN
shaft_typeDRILLED RADIALLY
wheel_typeSOLID
body_length0.781 INCHES NOMINAL IN
felt_washerNOT INCLUDED
plate_styleRECTANGULAR
skirt_styleRING
tread_width2.000 INCHES NOMINAL IN
linkage_typeSHAFT
NSN5340-00-489-4606
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6611 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 5.250 INCHES NOMINAL IN
•
SAFE OPERATING LOAD RATING: 600.0 POUNDS NOMINAL LBS
•
EFFECTIVE HEIGHT: 7.250 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC PLATE
•
MATERIAL: STEEL PLATE
•
WHEEL TYPE: SOLID
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH5.250 INCHES NOMINAL IN
SAFE OPERATING LOAD RATING600.0 POUNDS NOMINAL LBS
EFFECTIVE HEIGHT7.250 INCHES NOMINAL IN
SURFACE TREATMENTZINC PLATE
MATERIALSTEEL PLATE
MATERIALSTEEL BODY
WHEEL TYPESOLID
MATERIALIRON CAST AND STEEL WHEEL RIM
SURFACE TREATMENTZINC BODY
STYLE DESIGNATORSWIVEL OFFSET
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
223B061-1-1Interchangeable
interchangeable cross-reference
interchangeable
6611Interchangeable
interchangeable cross-reference
interchangeable
JAN-6611MInterchangeable
interchangeable cross-reference
interchangeable
DMS 79022BInterchangeable
interchangeable cross-reference
interchangeable
236075Interchangeable
interchangeable cross-reference
interchangeable
AT15147Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6611?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6611?
6611 is a CONNECTOR,PLUG,ELECTRICAL.
What parts can replace 6611?
There are 10 known substitutes for 6611: 223B061-1-1, 6611, JAN-6611M and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6611?
6611 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-489-4606. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6611

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026