PartsTable
Technical Data Sheet
Download PDF

66077-8 — NUT,SELF-LOCKING,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

66077-8: NUT,SELF-LOCKING,HEXAGON.

The NUT,SELF-LOCKING,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: HEXAGON, nut_height: 0.117 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN, temp_rating: 800.0 FAHRENHEIT NOMINAL DEGF, thread_class: 3B, thread_series: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the U.S.

Government catalog under NSN 5310-00-948-0886, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
66077-8
NSN: 5310-00-948-0886
FSC: 5310 — Nuts and Washers
CAGE: 93322 — GE AVIATION SYSTEMS LLC DBA GE AVIATION (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleHEXAGON
nut_height0.117 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
temp_rating800.0 FAHRENHEIT NOMINAL DEGF
thread_class3B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
precious_materialSILVER
surface_treatmentSILVER OVERALL
width_across_flats0.181 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN
nominal_thread_size0.099 INCHES IN
NSN5310-00-948-0886
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 66077-8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.181 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN
•
BEARING SURFACE FINISH: 125.0 MICROINCHES
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
PRECIOUS MATERIAL: SILVER
•
TEMP RATING: 800.0 FAHRENHEIT NOMINAL DEGF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.099 INCHES IN
•
LOCKING FEATURE: PREVAILING TORQUE ALL METAL DESIGN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.181 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN
BEARING SURFACE FINISH125.0 MICROINCHES
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
PRECIOUS MATERIALSILVER
TEMP RATING800.0 FAHRENHEIT NOMINAL DEGF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.099 INCHES IN
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
NUT HEIGHT0.117 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
SURFACE TREATMENTSILVER OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
LS8858-03Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 66077-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 66077-8?
66077-8 is a NUT,SELF-LOCKING,HEXAGON.
What parts can replace 66077-8?
There is 1 known substitute for 66077-8: LS8858-03. Substitute compatibility should be verified for your specific system.
What is the NSN for 66077-8?
66077-8 is cataloged in the U.S. Government catalog under NSN 5310-00-948-0886. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 66077-8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.