PartsTable
Technical Data Sheet
Download PDF

660-032NF25S4-05 — CAP-PLUG,PROTECTIVE,DUST AND MOI

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

660-032NF25S4-05: CAP-PLUG,PROTECTIVE,DUST AND MOI.

CAP-PLUG,PROTECTIVE,DUST AND MOI. Key specifications include special_features: MATT:CADMIUM PLATE, OLIVE DRAB OVER ELECTROLESS NICKEL;4 IN. NO.

8 SASHCHAIN ATTACHMENT WITH 0.167 IN EYELET IN, length_under_shoulder: 0.762 INCHES MINIMUM AND 0.788 INCHES MAXIMUM IN, end_item_identification: C-17A AIRCRAFT A, open_end_inside_diameter: 1.384 INCHES NOMINAL IN, closed_end_overall_diameter: 2.060 INCHES NOMINAL IN, part_name_assigned_by_controlling_agency: PLUG COVER. This part is cataloged in the U.S. Government catalog under NSN 5340-01-619-3362, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
660-032NF25S4-05
NSN: 5340-01-619-3362
FSC: 5340 — Hardware, Commercial
CAGE: 06324 — GLENAIR, INC. (USA)
SPECIFICATIONS
special_featuresMATT:CADMIUM PLATE, OLIVE DRAB OVER ELECTROLESS NICKEL;4 IN. NO. 8 SASHCHAIN ATTACHMENT WITH 0.167 IN EYELET IN
length_under_shoulder0.762 INCHES MINIMUM AND 0.788 INCHES MAXIMUM IN
end_item_identificationC-17A AIRCRAFT A
open_end_inside_diameter1.384 INCHES NOMINAL IN
closed_end_overall_diameter2.060 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyPLUG COVER
NSN5340-01-619-3362
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 660-032NF25S4-05 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CLOSED END OVERALL DIAMETER: 2.060 INCHES NOMINAL IN
•
LENGTH UNDER SHOULDER: 0.762 INCHES MINIMUM AND 0.788 INCHES MAXIMUM IN
•
OPEN END INSIDE DIAMETER: 1.384 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CLOSED END OVERALL DIAMETER2.060 INCHES NOMINAL IN
LENGTH UNDER SHOULDER0.762 INCHES MINIMUM AND 0.788 INCHES MAXIMUM IN
SPECIAL FEATURESMATT:CADMIUM PLATE, OLIVE DRAB OVER ELECTROLESS NICKEL;4 IN. NO. 8 SASHCHAIN ATTACHMENT WITH 0.167 IN EYELET IN
OPEN END INSIDE DIAMETER1.384 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYPLUG COVER
END ITEM IDENTIFICATIONC-17A AIRCRAFT A
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 660-032NF25S4-05?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 660-032NF25S4-05?
660-032NF25S4-05 is a CAP-PLUG,PROTECTIVE,DUST AND MOI.
What is the NSN for 660-032NF25S4-05?
660-032NF25S4-05 is cataloged in the U.S. Government catalog under NSN 5340-01-619-3362. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 660-032NF25S4-05