PartsTable
Technical Data Sheet
Download PDF

66-384 — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited
Verbatim · MRO · MRO_GENERAL
PRODUCT OVERVIEW

66-384: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include angle: 20.0 DEGREES NOMINAL, material: COPPER ALLOY BODY, body_style: CYLINDRICAL SERVO MOUNTED, body_length: 1.200 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED, pilot_length: 0.0620 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-049-0245, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 66-384
NSN: 5330-00-049-0245
NIINs: 000490245, 000555127, 002800257, 004354393, 014256890
FSC: 5330 — Packing and Gasket Materials
CAGE: 0AHP5 — CURTISS-WRIGHT CONTROLS, INC. DIV ACTUATION DIVISION (USA)
SPECIFICATIONS
angle20.0 DEGREES NOMINAL
materialCOPPER ALLOY BODY
body_styleCYLINDRICAL SERVO MOUNTED
body_length1.200 INCHES NOMINAL IN
shaft_styleROUND, SLOTTED
pilot_length0.0620 INCHES NOMINAL IN
shaft_length0.500 INCHES NOMINAL IN
shaft_runout0.001 INCHES IN
actuator_typeDOUBLE ENDED SHAFT
body_diameter1.000 INCHES NOMINAL IN
terminal_typeTAB, SOLDER LUG
inclosure_typeENCAPSULATED
NSN5330-00-049-0245
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 66-384 MFR: Verbatim ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.312 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: ANGLE
•
ANGLE: 20.0 DEGREES NOMINAL
•
PERIPHERAL DIAMETER: 0.562 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.312 INCHES NOMINAL IN
•
MATERIAL: CORK OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.312 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEANGLE
ANGLE20.0 DEGREES NOMINAL
PERIPHERAL DIAMETER0.562 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.312 INCHES NOMINAL IN
MATERIALCORK OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 66-384?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 66-384?
66-384 is a RESISTOR,VARIABLE,WIRE WOUND,PRE manufactured by Verbatim. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 66-384?
66-384 is cataloged in the U.S. Government catalog under NSN 5330-00-049-0245. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 66-384

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.