PartsTable / COMPONENT / 65X714
65X714
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, housing_bore_diameter: 2.502 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.562 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-285-6835, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
65X714
NSN: 5330-00-285-6835 FSC: 5330 CAGE: 73680 — GARLOCK SEALING TECHNOLOGIES LLC DBA GARLOCK SEALING TECHNOLOGIES LLC (USA)
SPECIFICATIONS
material LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT case_style SQUARE seal_width 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN housing_bore_diameter 2.502 INCHES NOMINAL IN sealing_element_style ANGULAR accommodated_shaft_diameter 1.562 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 2000 FEET PER MINUTE FT NSN 5330-00-285-6835
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 65X714
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• ACCOMMODATED SHAFT DIAMETER: 1.562 INCHES NOMINAL IN
• HOUSING BORE DIAMETER: 2.502 INCHES NOMINAL IN
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
• MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
• SEALING ELEMENT STYLE: ANGULAR
• SEAL WIDTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER 1.562 INCHES NOMINAL IN HOUSING BORE DIAMETER 2.502 INCHES NOMINAL IN ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT MATERIAL LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT SEALING ELEMENT STYLE ANGULAR CASE STYLE SQUARE SEAL WIDTH 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
5018-5 Interchangeable interchangeable cross-reference
interchangeable
101181 Interchangeable interchangeable cross-reference
interchangeable
FFS92 Interchangeable interchangeable cross-reference
interchangeable
101-1/8-1 Interchangeable interchangeable cross-reference
interchangeable
125-1/8-1 Interchangeable interchangeable cross-reference
interchangeable
282-501-9014 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 65X714?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 65X714?
65X714 is a SEAL,PLAIN ENCASED.
What parts can replace 65X714?
There are 25 known substitutes for 65X714: 5018-5, 101181, FFS92 and 22 more. Substitute compatibility should be verified for your specific system.
Is 65X714 still available?
65X714 is currently cancelled.