PartsTable
Technical Data Sheet
Download PDF

65X592 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

65X592: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.312 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, temp_rating: 250.0 FAHRENHEIT DEGF, housing_bore_diameter: 2.124 INCHES MINIMUM AND 2.126 INCHES MAXIMUM IN, sealing_element_style: ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-835-1997, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
65X592
NSN: 5330-00-835-1997
FSC: 5330 — Packing and Gasket Materials
CAGE: 73680 — GARLOCK SEALING TECHNOLOGIES LLC DBA GARLOCK SEALING TECHNOLOGIES LLC (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.312 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
temp_rating250.0 FAHRENHEIT DEGF
housing_bore_diameter2.124 INCHES MINIMUM AND 2.126 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.437 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3000 FEET PER MINUTE FT
NSN5330-00-835-1997
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 65X592 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: 250.0 FAHRENHEIT DEGF
•
SEAL WIDTH: 0.312 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 2.124 INCHES MINIMUM AND 2.126 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.437 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
TEMP RATING250.0 FAHRENHEIT DEGF
SEAL WIDTH0.312 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER2.124 INCHES MINIMUM AND 2.126 INCHES MAXIMUM IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3000 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.437 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 3
00044Reference document
Same NSN cross-reference
Reference document — Secondary reference
509205Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
X11791Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 65X592?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 65X592?
65X592 is a SEAL,PLAIN ENCASED.
What parts can replace 65X592?
There are 3 known substitutes for 65X592: 00044, 509205, X11791. Substitute compatibility should be verified for your specific system.
What is the NSN for 65X592?
65X592 is cataloged in the U.S. Government catalog under NSN 5330-00-835-1997. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 65X592

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.