PartsTable / COMPONENT / 65X1740
65X1740
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, special_features: TECH ORDER 11W1-33-7-2 FIG 6, housing_bore_diameter: 3.350 INCHES NOMINAL IN, sealing_element_style: ANGULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-526-8974, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
65X1740
NSN: 5330-00-526-8974 FSC: 5330 CAGE: 73680 — GARLOCK SEALING TECHNOLOGIES LLC DBA GARLOCK SEALING TECHNOLOGIES LLC (USA)
SPECIFICATIONS
material STEEL CASE case_style SQUARE seal_width 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN special_features TECH ORDER 11W1-33-7-2 FIG 6 housing_bore_diameter 3.350 INCHES NOMINAL IN sealing_element_style ANGULAR end_item_identification 105 MM AN/AWG-30 TRAINABLE GUN MOUNT AND 105 MM GUN, C130 ACFT MM accommodated_shaft_diameter 2.438 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 2000 FEET PER MINUTE FT NSN 5330-00-526-8974
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 65X1740
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SEALING ELEMENT STYLE: ANGULAR
• SEAL WIDTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
• MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
• HOUSING BORE DIAMETER: 3.350 INCHES NOMINAL IN
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLE ANGULAR SEAL WIDTH 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN MATERIAL RUBBER SYNTHETIC SEALING ELEMENT HOUSING BORE DIAMETER 3.350 INCHES NOMINAL IN ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT CASE STYLE SQUARE MATERIAL STEEL CASE SPECIAL FEATURES TECH ORDER 11W1-33-7-2 FIG 6 ACCOMMODATED SHAFT DIAMETER 2.438 INCHES NOMINAL IN END ITEM IDENTIFICATION 105 MM AN/AWG-30 TRAINABLE GUN MOUNT AND 105 MM GUN, C130 ACFT MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
12053 Interchangeable interchangeable cross-reference
interchangeable
206L Interchangeable interchangeable cross-reference
interchangeable
917-LH 3/8 Interchangeable interchangeable cross-reference
interchangeable
50374 Interchangeable interchangeable cross-reference
interchangeable
M3912 Interchangeable interchangeable cross-reference
interchangeable
24287 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 65X1740?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 65X1740?
65X1740 is a SEAL,PLAIN ENCASED.
What parts can replace 65X1740?
There are 23 known substitutes for 65X1740: 12053, 206L, 917-LH 3/8 and 20 more. Substitute compatibility should be verified for your specific system.
Is 65X1740 still available?
65X1740 is currently cancelled.
Request a Quote — 65X1740