PartsTable / COMPONENT / 65X1478
65X1478
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN, outside_diameter: 3.066 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 3.061 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-641-2094, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
65X1478
NSN: 5330-00-641-2094 FSC: 5330 CAGE: 73680 — GARLOCK SEALING TECHNOLOGIES LLC DBA GARLOCK SEALING TECHNOLOGIES LLC (USA)
SPECIFICATIONS
material LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT case_style SQUARE seal_width 0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN outside_diameter 3.066 INCHES NOMINAL IN surface_treatment PLASTIC CASE housing_bore_diameter 3.061 INCHES NOMINAL IN sealing_element_style ANGULAR accommodated_shaft_diameter 2.250 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 2000 FEET PER MINUTE FT NSN 5330-00-641-2094
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 65X1478
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• OUTSIDE DIAMETER: 3.066 INCHES NOMINAL IN
• ACCOMMODATED SHAFT DIAMETER: 2.250 INCHES NOMINAL IN
• SURFACE TREATMENT: PLASTIC CASE
• HOUSING BORE DIAMETER: 3.061 INCHES NOMINAL IN
• MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
• SEAL WIDTH: 0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER 3.066 INCHES NOMINAL IN ACCOMMODATED SHAFT DIAMETER 2.250 INCHES NOMINAL IN SURFACE TREATMENT PLASTIC CASE HOUSING BORE DIAMETER 3.061 INCHES NOMINAL IN MATERIAL LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT CASE STYLE SQUARE SEAL WIDTH 0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN SEALING ELEMENT STYLE ANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
50192 Interchangeable interchangeable cross-reference
interchangeable
600D16 Interchangeable interchangeable cross-reference
interchangeable
760-03 Interchangeable interchangeable cross-reference
interchangeable
2640PL2178217 Interchangeable interchangeable cross-reference
interchangeable
VS-743 Interchangeable interchangeable cross-reference
interchangeable
A28748-001 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 65X1478?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 65X1478?
65X1478 is a SEAL,PLAIN ENCASED.
What parts can replace 65X1478?
There are 23 known substitutes for 65X1478: 50192, 600D16, 760-03 and 20 more. Substitute compatibility should be verified for your specific system.
Is 65X1478 still available?
65X1478 is currently cancelled.
Request a Quote — 65X1478