PartsTable
Technical Data Sheet
Download PDF

65PT500-0551-0 — BIT,AUGER

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

65PT500-0551-0: BIT,AUGER.

The BIT,AUGER is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, shank_style: HEXAGON, twist_length: 24.000 INCHES NOMINAL IN, overall_length: 29.000 INCHES NOMINAL IN, hardness_rating: 40.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM, cutting_end_style: HOLLOW CENTER SINGLE TWIST W/SCREW POINT. This part is cataloged in the U.S.

Government catalog under NSN 5133-00-137-2763, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
65PT500-0551-0
NSN: 5133-00-137-2763
FSC: 5133 — Drill Bits, Counterbores, and Countersinks: Hand and Machine
CAGE: 26289 — GREENLEE TEXTRON INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
shank_styleHEXAGON
twist_length24.000 INCHES NOMINAL IN
overall_length29.000 INCHES NOMINAL IN
hardness_rating40.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
cutting_end_styleHOLLOW CENTER SINGLE TWIST W/SCREW POINT
width_across_flats0.437 INCHES NOMINAL IN
nominal_cutting_diameter0.8125 INCHES IN
NSN5133-00-137-2763
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available BIT,AUGER TITLE COMPONENT PN 65PT500-0551-0 MFR BIT,AUGER
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.437 INCHES NOMINAL IN
•
CUTTING END STYLE: HOLLOW CENTER SINGLE TWIST W/SCREW POINT
•
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
•
NOMINAL CUTTING DIAMETER: 0.8125 INCHES IN
•
SHANK STYLE: HEXAGON
•
MATERIAL: STEEL OVERALL
•
TWIST LENGTH: 24.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.437 INCHES NOMINAL IN
CUTTING END STYLEHOLLOW CENTER SINGLE TWIST W/SCREW POINT
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
OVERALL LENGTH29.000 INCHES NOMINAL IN
NOMINAL CUTTING DIAMETER0.8125 INCHES IN
SHANK STYLEHEXAGON
MATERIALSTEEL OVERALL
TWIST LENGTH24.000 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
65PT-13/16INX24INReference document
Same NSN cross-reference
Reference document — Secondary reference
47013Reference document
Same NSN cross-reference
Reference document — Secondary reference
424H 13/16Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 65PT500-0551-0?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 65PT500-0551-0?
65PT500-0551-0 is a BIT,AUGER.
What parts can replace 65PT500-0551-0?
There are 3 known substitutes for 65PT500-0551-0: 65PT-13/16INX24IN, 47013, 424H 13/16. Substitute compatibility should be verified for your specific system.
What is the NSN for 65PT500-0551-0?
65PT500-0551-0 is cataloged in the U.S. Government catalog under NSN 5133-00-137-2763. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 65PT500-0551-0

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.