PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 65C35465
65C35465 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.500 INCHES NOMINAL IN, housing_bore_diameter: 3.125 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 2.437 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-1629, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
65C35465
NSN: 5330-00-291-1629
FSC: 5330
CAGE: 98752 — WARNER ROBINS AIR LOGISTICS CENTER (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.500 INCHES NOMINAL IN
housing_bore_diameter3.125 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.437 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-291-1629
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 65C35465 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: ANGULAR
•
SEAL WIDTH: 0.500 INCHES NOMINAL IN
•
MATERIAL: LEATHER SEALING ELEMENT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
ACCOMMODATED SHAFT DIAMETER: 2.437 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 3.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
SEAL WIDTH0.500 INCHES NOMINAL IN
MATERIALLEATHER SEALING ELEMENT
CASE STYLESQUARE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
ACCOMMODATED SHAFT DIAMETER2.437 INCHES NOMINAL IN
MATERIALSTEEL CASE
HOUSING BORE DIAMETER3.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
312-AInterchangeable
interchangeable cross-reference
interchangeable
N4P-MInterchangeable
interchangeable cross-reference
interchangeable
G108-M-CBInterchangeable
interchangeable cross-reference
interchangeable
GGG000591TY2CLBSTYCSZ1PTInterchangeable
interchangeable cross-reference
interchangeable
GGG-0-591TY2CL B STY2Interchangeable
interchangeable cross-reference
interchangeable
50-525Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 65C35465?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 65C35465?
65C35465 is a SEAL,PLAIN ENCASED.
What parts can replace 65C35465?
There are 14 known substitutes for 65C35465: 312-A, N4P-M, G108-M-CB and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 65C35465?
65C35465 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-1629. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 65C35465

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026