The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL OR STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1012 OR STEEL COMP 1015 OR STEEL COMP 1017 OR STEEL COMP 1020, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 4.000 INCHES NOMINAL IN, first_leg_length: 0.750 INCHES NOMINAL IN, second_leg_style: SQUARE. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-251-6409, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
65A81-C384
NSN:5340-01-251-6409 FSC:5340 — Hardware, Commercial CAGE:30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
material
STEEL OR STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1012 OR STEEL COMP 1015 OR STEEL COMP 1017 OR STEEL COMP 1020
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_style
SQUARE
first_leg_width
4.000 INCHES NOMINAL IN
first_leg_length
0.750 INCHES NOMINAL IN
second_leg_style
SQUARE
second_leg_width
4.000 INCHES NOMINAL IN
special_features
SECOND LEG HAS ADITIONAL HOLE 0.625 IN. MIN AND 0.626 IN. MAX DIA 0.750 IN. FROM END CENTERED ON W OF LEG; ONE HOLE 0.093 IN. DIA 2.500 IN. FROM 5/8 DIA HOLE AND 0.750 IN. FROM BOTTOM IN
style_designator
ANGLE
second_leg_length
1.000 INCHES NOMINAL IN
surface_treatment
CADMIUM AND CHROMATE
mounting_hole_type
THREADED
NSN
5340-01-251-6409
COMPONENT DIAGRAM
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.250 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.500 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.149 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.164 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE
•
SECOND LEG WIDTH: 4.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.250 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.500 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER
0.149 INCHES NOMINAL IN
FIRST LEG ANGLE
90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
NOT IDENTICAL
SECOND LEG HOLE DIAMETER
0.164 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE
SECOND LEG WIDTH
4.000 INCHES NOMINAL IN
SECOND LEG LENGTH
1.000 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLE
THREE HOLES
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 65A81-C384?
65A81-C384 is a BRACKET,ANGLE.
What is the NSN for 65A81-C384?
65A81-C384 is cataloged in the U.S. Government catalog under NSN 5340-01-251-6409. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.