PartsTable
Technical Data Sheet
Download PDF

6596-81-140-3101 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6596-81-140-3101: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.758 INCHES MINIMUM AND 0.788 INCHES MAXIMUM IN, housing_bore_diameter: 4.878 INCHES MINIMUM AND 4.883 INCHES MAXIMUM IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 3.855 INCHES MINIMUM AND 3.860 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-123-7118, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6596-81-140-3101
NSN: 5330-01-123-7118
FSC: 5330 — Packing and Gasket Materials
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.758 INCHES MINIMUM AND 0.788 INCHES MAXIMUM IN
housing_bore_diameter4.878 INCHES MINIMUM AND 4.883 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter3.855 INCHES MINIMUM AND 3.860 INCHES MAXIMUM IN
NSN5330-01-123-7118
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6596-81-140-3101 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.758 INCHES MINIMUM AND 0.788 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 4.878 INCHES MINIMUM AND 4.883 INCHES MAXIMUM IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 3.855 INCHES MINIMUM AND 3.860 INCHES MAXIMUM IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.758 INCHES MINIMUM AND 0.788 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER4.878 INCHES MINIMUM AND 4.883 INCHES MAXIMUM IN
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER3.855 INCHES MINIMUM AND 3.860 INCHES MAXIMUM IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 1
527199Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 6596-81-140-3101?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6596-81-140-3101?
6596-81-140-3101 is a SEAL,PLAIN ENCASED.
What parts can replace 6596-81-140-3101?
There is 1 known substitute for 6596-81-140-3101: 527199. Substitute compatibility should be verified for your specific system.
What is the NSN for 6596-81-140-3101?
6596-81-140-3101 is cataloged in the U.S. Government catalog under NSN 5330-01-123-7118. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6596-81-140-3101