PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6592-8
6592-8 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CAP,VALVE is a the manufacturer industrial component. Key specifications include color: WHITE OVERALL, material: PAPER COATING, nominal_length: 100.0 YARDS, surface_luster: LUSTERLESS, adhesive_location: ONE SIDE, minimum_tensile_strength: 17 POUNDS PER SQUARE INCH LBS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-250-5733, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6592-8
NSN: 5330-00-250-5733
FSC: 5330
CAGE: 23382 — FWD SEAGRAVE HOLDINGS LP (USA)
SPECIFICATIONS
colorWHITE OVERALL
materialPAPER COATING
nominal_length100.0 YARDS
surface_lusterLUSTERLESS
adhesive_locationONE SIDE
minimum_tensile_strength17 POUNDS PER SQUARE INCH LBS
NSN5330-00-250-5733
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6592-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 1.124 INCHES NOMINAL IN
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
MATERIAL: LEATHER SEALING ELEMENT
•
ACCOMMODATED SHAFT DIAMETER: 0.719 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER1.124 INCHES NOMINAL IN
SEAL WIDTH0.375 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
MATERIALLEATHER SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER0.719 INCHES NOMINAL IN
MATERIALSTEEL CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
54A20011Interchangeable
interchangeable cross-reference
interchangeable
60119-400-51Interchangeable
interchangeable cross-reference
interchangeable
213-40-93-163Interchangeable
interchangeable cross-reference
interchangeable
SA2573Interchangeable
interchangeable cross-reference
interchangeable
5950001560743Interchangeable
interchangeable cross-reference
interchangeable
10237466Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6592-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6592-8?
6592-8 is a CAP,VALVE.
What parts can replace 6592-8?
There are 16 known substitutes for 6592-8: 54A20011, 60119-400-51, 213-40-93-163 and 13 more. Substitute compatibility should be verified for your specific system.
Is 6592-8 still available?
6592-8 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6592-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026