PartsTable
Technical Data Sheet
Download PDF

659056 — CYLINDER BLOCK,HYDRAULIC MOTOR-P

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

659056: CYLINDER BLOCK,HYDRAULIC MOTOR-P.

CYLINDER BLOCK,HYDRAULIC MOTOR-P. Key specifications include material: STEEL OVERALL, nut_style: HOSE COUPLING, nut_height: 1.297 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNS, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-975-8084, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
659056
NSN: 4730-00-975-8084
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 77237 — DANA OFF HIGHWAY PRODUCTS, LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHOSE COUPLING
nut_height1.297 INCHES NOMINAL IN
thread_class2B
thread_seriesUNS
thread_directionRIGHT-HAND
hose_nominal_size0.722 INCHES IN
surface_treatmentCADMIUM OVERALL
nominal_thread_size0.421 INCHES IN
largest_outside_diameter0.812 INCHES NOMINAL IN
smallest_inside_diameter0.422 INCHES NOMINAL IN
thread_quantity_per_inch28
NSN4730-00-975-8084
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 659056 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LARGEST OUTSIDE DIAMETER: 0.812 INCHES NOMINAL IN
•
THREAD SERIES: UNS
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.421 INCHES IN
•
NUT HEIGHT: 1.297 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
HOSE NOMINAL SIZE: 0.722 INCHES IN
•
NUT STYLE: HOSE COUPLING
TECHNICAL CHARACTERISTICS
LARGEST OUTSIDE DIAMETER0.812 INCHES NOMINAL IN
THREAD SERIESUNS
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.421 INCHES IN
NUT HEIGHT1.297 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
HOSE NOMINAL SIZE0.722 INCHES IN
NUT STYLEHOSE COUPLING
THREAD CLASS2B
THREAD QUANTITY PER INCH28
SUBSTITUTES & CROSS-REFERENCES 5
1303220Reference document
Same NSN cross-reference
Reference document — Secondary reference
20020-6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
171SB793Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1106-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
1106-6SReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 659056?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 659056?
659056 is a CYLINDER BLOCK,HYDRAULIC MOTOR-P.
What parts can replace 659056?
There are 5 known substitutes for 659056: 1303220, 20020-6, 171SB793 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 659056?
659056 is cataloged in the U.S. Government catalog under NSN 4730-00-975-8084. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 659056