PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 65700-50001-110
65700-50001-110 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_length: 5.755 INCHES NOMINAL IN, surface_treatment: CADMIUM OVERALL, center_to_center_distance_between_mounting_facilities_parallel_to_width: 0.875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-139-5761, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
65700-50001-110
NSN: 5340-01-139-5761
FSC: 5340
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_length5.755 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
center_to_center_distance_between_mounting_facilities_parallel_to_width0.875 INCHES NOMINAL IN
NSN5340-01-139-5761
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 65700-50001-110 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: CADMIUM OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH: 0.875 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
OVERALL LENGTH5.755 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH0.875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
20507-7Interchangeable
interchangeable cross-reference
interchangeable
133418Interchangeable
interchangeable cross-reference
interchangeable
1038000A000-002Interchangeable
interchangeable cross-reference
interchangeable
3284Interchangeable
interchangeable cross-reference
interchangeable
1038-000-A000-2Interchangeable
interchangeable cross-reference
interchangeable
0A498Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 65700-50001-110?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 65700-50001-110?
65700-50001-110 is a HANDLE,BOW.
What parts can replace 65700-50001-110?
There are 13 known substitutes for 65700-50001-110: 20507-7, 133418, 1038000A000-002 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 65700-50001-110?
65700-50001-110 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-139-5761. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 65700-50001-110

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026