6558-102 — RESISTOR,FIXED,FILM

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

6558-102: RESISTOR,FIXED,FILM.

The RESISTOR,FIXED,FILM is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC AND RUBBER CHLOROPRENE CLASS CR AND STEEL CORROSION RESISTING, temp_rating: -31.7 CELSIUS AND 60.0 CELSIUS DEGC, neutral_length: 9.160 INCHES NOMINAL IN, thickness_at_both_ends: 0.200 INCHES NOMINAL IN, thickness_between_ends: 0.080 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN, end_item_identification: M901/M981 FAMILY. This part is cataloged in the U.S.

Government catalog under NSN 9390-01-050-0179, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 6558-102

NSN: 9390-01-050-0179
NIINs: 010500179, 011812770
FSC: 9390 — Miscellaneous Fabricated Nonmetallic Materials
CAGE: 11871 — RECON/OPTICAL, INC. (USA)

SPECIFICATIONS

material	RUBBER SYNTHETIC AND RUBBER CHLOROPRENE CLASS CR AND STEEL CORROSION RESISTING
temp_rating	-31.7 CELSIUS AND 60.0 CELSIUS DEGC
neutral_length	9.160 INCHES NOMINAL IN
special_features	INTERNAL AND EXTERNAL STEEL RINGS; 94 DEG LEFT BEND/64 DEG RIGHT BEND TOLERATED; MINUS 5 TO PLUS 5 PSIG OPERATING PRESSURE
thickness_at_both_ends	0.200 INCHES NOMINAL IN
thickness_between_ends	0.080 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
end_item_identification	M901/M981 FAMILY
durometer_hardness_rating	60.0 NOMINAL
large_end_inside_diameter	5.500 INCHES NOMINAL IN
small_end_inside_diameter	4.750 INCHES NOMINAL IN
NSN	9390-01-050-0179

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -31.7 CELSIUS AND 60.0 CELSIUS DEGC

•

SMALL END INSIDE DIAMETER: 4.750 INCHES NOMINAL IN

•

LARGE END INSIDE DIAMETER: 5.500 INCHES NOMINAL IN

•

NEUTRAL LENGTH: 9.160 INCHES NOMINAL IN

•

THICKNESS AT BOTH ENDS: 0.200 INCHES NOMINAL IN

•

THICKNESS BETWEEN ENDS: 0.080 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

TEMP RATING	-31.7 CELSIUS AND 60.0 CELSIUS DEGC
SMALL END INSIDE DIAMETER	4.750 INCHES NOMINAL IN
LARGE END INSIDE DIAMETER	5.500 INCHES NOMINAL IN
NEUTRAL LENGTH	9.160 INCHES NOMINAL IN
THICKNESS AT BOTH ENDS	0.200 INCHES NOMINAL IN
SPECIAL FEATURES	INTERNAL AND EXTERNAL STEEL RINGS; 94 DEG LEFT BEND/64 DEG RIGHT BEND TOLERATED; MINUS 5 TO PLUS 5 PSIG OPERATING PRESSURE
THICKNESS BETWEEN ENDS	0.080 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
END ITEM IDENTIFICATION	M901/M981 FAMILY
MATERIAL	RUBBER SYNTHETIC AND RUBBER CHLOROPRENE CLASS CR AND STEEL CORROSION RESISTING
DUROMETER HARDNESS RATING	60.0 NOMINAL

SUBSTITUTES & CROSS-REFERENCES 2

0433-0000-0116Reference document

Same NSN cross-reference

Reference document — Secondary reference

IT-4102Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — mutilation

Ready to buy 6558-102?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 6558-102?

6558-102 is a RESISTOR,FIXED,FILM. It is classified as a MRO (MRO_GENERAL).

What parts can replace 6558-102?

There are 2 known substitutes for 6558-102: 0433-0000-0116, IT-4102. Substitute compatibility should be verified for your specific system.

What is the NSN for 6558-102?

6558-102 is cataloged in the U.S. Government catalog under NSN 9390-01-050-0179. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

6558-102 — RESISTOR,FIXED,FILM

Request a Quote — 6558-102