PartsTable
Technical Data Sheet
Download PDF

655777 — REACTOR

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

655777: REACTOR.

The REACTOR is a the manufacturer industrial component. Key specifications include width: 1.000 INCHES NOMINAL IN, length: 6.125 INCHES NOMINAL IN, material: RUBBER SYNTHETIC CUSHIONING, thickness: 0.125 INCHES NOMINAL IN, hole_diameter: 0.515 INCHES NOMINAL IN, overall_height: 0.085 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-530-9542, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
655777
NSN: 5310-00-530-9542
NIINs: 005309542, 010227687, 013022028
FSC: 5310 — Nuts and Washers
CAGE: 57057 — NAVCOM DEFENSE ELECTRONICS, INC. (USA)
SPECIFICATIONS
width1.000 INCHES NOMINAL IN
length6.125 INCHES NOMINAL IN
materialRUBBER SYNTHETIC CUSHIONING
thickness0.125 INCHES NOMINAL IN
hole_diameter0.515 INCHES NOMINAL IN
overall_height0.085 INCHES NOMINAL IN
hardness_rating76.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 80.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM
outside_diameter0.745 INCHES NOMINAL IN
material_thickness0.015 INCHES NOMINAL IN
end_item_identificationFPACER SPECIAL
part_name_assigned_by_controlling_agencyNAVY SPECIAL PROJECT
NSN5310-00-530-9542
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 655777 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 76.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 80.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM
•
OUTSIDE DIAMETER: 0.745 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.015 INCHES NOMINAL IN
•
MATERIAL: COPPER OVERALL
•
HOLE DIAMETER: 0.515 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.085 INCHES NOMINAL IN
HARDNESS RATING76.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 80.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM
OUTSIDE DIAMETER0.745 INCHES NOMINAL IN
MATERIAL THICKNESS0.015 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
MATERIALCOPPER OVERALL
HOLE DIAMETER0.515 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
502-1548-002Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 655777?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 655777?
655777 is a REACTOR.
What parts can replace 655777?
There is 1 known substitute for 655777: 502-1548-002. Substitute compatibility should be verified for your specific system.
What is the NSN for 655777?
655777 is cataloged in the U.S. Government catalog under NSN 5310-00-530-9542. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 655777