PartsTable
Technical Data Sheet
Download PDF

655225 — HANDLE,EXTRACTOR

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

655225: HANDLE,EXTRACTOR.

The HANDLE,EXTRACTOR is a the manufacturer industrial component. Key specifications include material: STEEL, body_style: PLAIN, SOLID, bore_style: PLAIN BOTH ENDS, tooth_form: STANDARD, overall_width: 1.450 INCHES MINIMUM AND 1.490 INCHES MAXIMUM IN, pitch_diameter: 1.4980 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3020-00-273-1409, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 655225
NSN: 3020-00-273-1409
NIINs: 002731409, 011596782, 011606409
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL
body_stylePLAIN, SOLID
bore_stylePLAIN BOTH ENDS
tooth_formSTANDARD
overall_width1.450 INCHES MINIMUM AND 1.490 INCHES MAXIMUM IN
pitch_diameter1.4980 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
pressure_angle14.5000 DEGREES
teeth_quantity48
overall_diameter10.525 INCHES MINIMUM AND 10.545 INCHES MAXIMUM IN
style_designatorPROTRUDING HUB
surface_treatmentANODIZE OVERALL
face_nominal_width0.1250 INCHES IN
NSN3020-00-273-1409
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available HANDLE,EXTRACTOR TITLE COMPONENT PN 655225 MFR HANDLE,EXTRACTOR
KEY FEATURES
•
BORE NOMINAL DIAMETER: 1.1878 INCHES BOTH ENDS IN
•
HUB NOMINAL DIAMETER: 0.4380 INCHES FIRST END IN
•
TEETH QUANTITY: 48
•
BODY STYLE: PLAIN, SOLID
•
BORE STYLE: PLAIN BOTH ENDS
•
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END: 0.3750 INCHES FIRST END IN
•
STYLE DESIGNATOR: PROTRUDING HUB
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/5,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
BORE NOMINAL DIAMETER1.1878 INCHES BOTH ENDS IN
HUB NOMINAL DIAMETER0.4380 INCHES FIRST END IN
TEETH QUANTITY48
BODY STYLEPLAIN, SOLID
BORE STYLEPLAIN BOTH ENDS
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END0.3750 INCHES FIRST END IN
STYLE DESIGNATORPROTRUDING HUB
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/5,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
PITCH DIAMETER1.4980 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
TOOTH FORMSTANDARD
SUBSTITUTES & CROSS-REFERENCES 1
265230Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 655225?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 655225?
655225 is a HANDLE,EXTRACTOR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 655225?
There is 1 known substitute for 655225: 265230. Substitute compatibility should be verified for your specific system.
What is the NSN for 655225?
655225 is cataloged in the U.S. Government catalog under NSN 3020-00-273-1409. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 655225

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.