PartsTable
Technical Data Sheet
Download PDF

655-022-9014 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

655-022-9014: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include head_style: FLAT CHAMFER, head_height: 0.057 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN, spline_width: 0.013 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.092 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN, thread_length: 0.334 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-141-8091, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
655-022-9014
NSN: 5305-00-141-8091
FSC: 5305 — Screws
CAGE: 04795 — BE AEROSPACE CONSUMABLES MANAGEMENT DBA AEROSPACE SERVICES DIV CONSUMABLES SOLUTIONS (USA)
SPECIFICATIONS
materialSTEEL COMP 3135 OR STEEL COMP 4037H OR STEEL COMP 4137 OR STEEL COMP 4140H OR STEEL COMP 8630H OR STEEL COMP 8740H OVERALL
head_styleFLAT CHAMFER
head_height0.057 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
spline_width0.013 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.092 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
thread_length0.334 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
fastener_length0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
hardness_rating36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentOXIDE OVERALL
internal_drive_styleSIX SPLINE
NSN5305-00-141-8091
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 655-022-9014 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SPLINE MINOR DIAMETER: 0.050 INCHES MINIMUM AND 0.051 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.057 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
•
SPLINE WIDTH: 0.013 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.334 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
•
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
•
SPLINE MAJOR DIAMETER: 0.061 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.060 INCHES IN
TECHNICAL CHARACTERISTICS
SPLINE MINOR DIAMETER0.050 INCHES MINIMUM AND 0.051 INCHES MAXIMUM IN
HEAD HEIGHT0.057 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
FASTENER LENGTH0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
SPLINE WIDTH0.013 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN
THREAD LENGTH0.334 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
SPLINE MAJOR DIAMETER0.061 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.060 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
0-80NF3AX3-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 655-022-9014?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 655-022-9014?
655-022-9014 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 655-022-9014?
There is 1 known substitute for 655-022-9014: 0-80NF3AX3-8. Substitute compatibility should be verified for your specific system.
What is the NSN for 655-022-9014?
655-022-9014 is cataloged in the U.S. Government catalog under NSN 5305-00-141-8091. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 655-022-9014

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.