PartsTable
Technical Data Sheet
Download PDF

654968 — STEERING GEAR

✓ Government record, cited
Legrand · BOLT SCREW
PRODUCT OVERVIEW

654968: STEERING GEAR.

The STEERING GEAR is a Legrand industrial component. Key specifications include diameter: 41.780 INCHES NOMINAL IN, material: STEEL OVERALL, overall_length: 5.077 INCHES NOMINAL IN, end_item_identification: ACFT ENG TF33, engine_section_location: COMPRESSOR, criticality_code_justification: AGAV. This part is cataloged in the U.S.

Government catalog under NSN 5325-00-291-0388, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
654968
NSN: 5325-00-291-0388
NIINs: 002910388, 003303826, 011596826
FSC: 5325 — Fastening Devices
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
diameter41.780 INCHES NOMINAL IN
materialSTEEL OVERALL
overall_length5.077 INCHES NOMINAL IN
end_item_identificationACFT ENG TF33
engine_section_locationCOMPRESSOR
criticality_code_justificationAGAV
NSN5325-00-291-0388
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 654968 · Legrand ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RECEPTACLE OVERALL LENGTH: 1.281 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES: 1.000 INCHES NOMINAL IN
•
MOUNTING STYLE: PLAIN W/MOUNTING HOLE
•
TURNLOCK RECEPTACLE STYLE: RECEPTACLE
•
RECEPTACLE WIDTH: 0.750 INCHES NOMINAL IN
•
TURNLOCK MOUNTING HOLE DIAMETER: 0.130 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
RECEPTACLE HEIGHT: 0.266 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
RECEPTACLE OVERALL LENGTH1.281 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES1.000 INCHES NOMINAL IN
MOUNTING STYLEPLAIN W/MOUNTING HOLE
TURNLOCK RECEPTACLE STYLERECEPTACLE
RECEPTACLE WIDTH0.750 INCHES NOMINAL IN
TURNLOCK MOUNTING HOLE DIAMETER0.130 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
RECEPTACLE HEIGHT0.266 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 4
99833P130Reference document
Same NSN cross-reference
Reference document — Secondary reference
9M152-5-P130Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
BACS20B5P130Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10119089Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 654968?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 654968?
654968 is a STEERING GEAR manufactured by Legrand.
What parts can replace 654968?
There are 4 known substitutes for 654968: 99833P130, 9M152-5-P130, BACS20B5P130 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 654968?
654968 is cataloged in the U.S. Government catalog under NSN 5325-00-291-0388. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 654968

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.