PartsTable
Technical Data Sheet
Download PDF

654588 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

654588: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN, material: STEEL BAND, overall_width: 0.295 INCHES MINIMUM AND 0.305 INCHES MAXIMUM IN, style_designator: CENTER MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.038 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-168-6975, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
654588
NSN: 5340-00-168-6975
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
diameter0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
materialSTEEL BAND
overall_width0.295 INCHES MINIMUM AND 0.305 INCHES MAXIMUM IN
style_designatorCENTER MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.038 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
loop_inside_diameter3.000 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.880 INCHES NOMINAL IN
NSN5340-00-168-6975
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 654588 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CENTER MOUNT
•
DIAMETER: 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.038 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.880 INCHES NOMINAL IN
•
MATERIAL: STEEL BAND
•
LOOP INSIDE DIAMETER: 3.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORCENTER MOUNT
DIAMETER0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
OVERALL WIDTH0.295 INCHES MINIMUM AND 0.305 INCHES MAXIMUM IN
MATERIAL THICKNESS0.038 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.880 INCHES NOMINAL IN
MATERIALSTEEL BAND
LOOP INSIDE DIAMETER3.000 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 654588?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 654588?
654588 is a CLAMP,LOOP.
What is the NSN for 654588?
654588 is cataloged in the U.S. Government catalog under NSN 5340-00-168-6975. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 654588

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.