PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 654355
654355 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 937 OVERALL, corner_shape: SQUARE ALL CORNERS, overall_length: 1.1250 INCHES NOMINAL IN, style_designator: SOLID, PLAIN, NO OUTSIDE FLANGES, body_inside_diameter: 0.7490 INCHES MINIMUM AND 0.7520 INCHES MAXIMUM IN, body_outside_diameter: 0.7880 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-382-5859, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
654355
NSN: 5340-00-382-5859
FSC: 5340
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialCOPPER ALLOY 937 OVERALL
corner_shapeSQUARE ALL CORNERS
overall_length1.1250 INCHES NOMINAL IN
style_designatorSOLID, PLAIN, NO OUTSIDE FLANGES
body_inside_diameter0.7490 INCHES MINIMUM AND 0.7520 INCHES MAXIMUM IN
body_outside_diameter0.7880 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM IN
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-382-5859
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 654355 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.374 INCHES NOMINAL IN
•
MATERIAL: STEEL
•
THICKNESS: 0.035 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.374 INCHES NOMINAL IN
MATERIALSTEEL
THICKNESS0.035 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
216541Interchangeable
interchangeable cross-reference
interchangeable
8329036Interchangeable
interchangeable cross-reference
interchangeable
806736Interchangeable
interchangeable cross-reference
interchangeable
660712Interchangeable
interchangeable cross-reference
interchangeable
7410889Interchangeable
interchangeable cross-reference
interchangeable
654355Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 654355?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 654355?
654355 is a BEARING,SLEEVE.
What parts can replace 654355?
There are 7 known substitutes for 654355: 216541, 8329036, 806736 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 654355?
654355 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-382-5859. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 654355

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026