PartsTable
Technical Data Sheet
Download PDF

6536-30-605-1101 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6536-30-605-1101: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, end_radius: 0.280 INCHES NOMINAL IN, fork_depth: 0.375 INCHES NOMINAL IN, shank_length: 0.900 INCHES NOMINAL IN, thread_class: 3B ROD CONNECTION, hole_diameter: 0.193 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-917-2542, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6536-30-605-1101
NSN: 5340-00-917-2542
FSC: 5340 — Hardware, Commercial
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
end_radius0.280 INCHES NOMINAL IN
fork_depth0.375 INCHES NOMINAL IN
shank_length0.900 INCHES NOMINAL IN
thread_class3B ROD CONNECTION
hole_diameter0.193 INCHES NOMINAL IN
overall_width0.430 INCHES NOMINAL IN
thread_length1.085 INCHES NOMINAL ROD CONNECTION IN
overall_height0.562 INCHES NOMINAL IN
shank_diameter0.312 INCHES NOMINAL IN
fork_span_width0.250 INCHES NOMINAL IN
style_designatorCLEVIS
NSN5340-00-917-2542
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6536-30-605-1101 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.312 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.250 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.090 INCHES NOMINAL IN
•
END RADIUS: 0.280 INCHES NOMINAL IN
•
THREAD LENGTH: 1.085 INCHES NOMINAL ROD CONNECTION IN
•
SHANK LENGTH: 0.900 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.312 INCHES NOMINAL IN
OVERALL HEIGHT0.562 INCHES NOMINAL IN
FORK SPAN WIDTH0.250 INCHES NOMINAL IN
FORK ARM THICKNESS0.090 INCHES NOMINAL IN
END RADIUS0.280 INCHES NOMINAL IN
THREAD LENGTH1.085 INCHES NOMINAL ROD CONNECTION IN
SHANK LENGTH0.900 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.430 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 6536-30-605-1101?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6536-30-605-1101?
6536-30-605-1101 is a CLEVIS,ROD END.
What is the NSN for 6536-30-605-1101?
6536-30-605-1101 is cataloged in the U.S. Government catalog under NSN 5340-00-917-2542. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6536-30-605-1101