PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 65345
65345 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, groove_width: 0.531 INCHES NOMINAL IN, grommet_style: ROUND, hole_diameter: 0.125 INCHES NOMINAL IN, overall_height: 0.656 INCHES NOMINAL IN, flange_thickness: 0.031 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-519-4636, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
65345
NSN: 5325-00-519-4636
FSC: 5325
CAGE: 0AHP5 — CURTISS-WRIGHT CONTROLS, INC. DIV ACTUATION DIVISION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
groove_width0.531 INCHES NOMINAL IN
grommet_styleROUND
hole_diameter0.125 INCHES NOMINAL IN
overall_height0.656 INCHES NOMINAL IN
flange_thickness0.031 INCHES NOMINAL IN
groove_outside_diameter0.531 INCHES NOMINAL IN
grommet_construction_typeSPLIT
nonmetallic_hardness_rating55.0 MINIMUM SHORE DUROMETER A AND 65.0 MAXIMUM SHORE DUROMETER A
large_flange_outside_diameter0.312 INCHES NOMINAL IN
NSN5325-00-519-4636
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 65345 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LARGE FLANGE OUTSIDE DIAMETER: 0.312 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.125 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.031 INCHES NOMINAL IN
•
GROOVE OUTSIDE DIAMETER: 0.531 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
NONMETALLIC HARDNESS RATING: 55.0 MINIMUM SHORE DUROMETER A AND 65.0 MAXIMUM SHORE DUROMETER A
•
GROMMET STYLE: ROUND
TECHNICAL CHARACTERISTICS (FLIS)
LARGE FLANGE OUTSIDE DIAMETER0.312 INCHES NOMINAL IN
HOLE DIAMETER0.125 INCHES NOMINAL IN
FLANGE THICKNESS0.031 INCHES NOMINAL IN
GROOVE OUTSIDE DIAMETER0.531 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
NONMETALLIC HARDNESS RATING55.0 MINIMUM SHORE DUROMETER A AND 65.0 MAXIMUM SHORE DUROMETER A
OVERALL HEIGHT0.656 INCHES NOMINAL IN
GROMMET STYLEROUND
GROMMET CONSTRUCTION TYPESPLIT
GROOVE WIDTH0.531 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
2019916Interchangeable
interchangeable cross-reference
interchangeable
01770-0056Interchangeable
interchangeable cross-reference
interchangeable
P18220Interchangeable
interchangeable cross-reference
interchangeable
201089Interchangeable
interchangeable cross-reference
interchangeable
201089-4Interchangeable
interchangeable cross-reference
interchangeable
201089-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 65345?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 65345?
65345 is a PIN,STRAIGHT,HEADED.
What parts can replace 65345?
There are 15 known substitutes for 65345: 2019916, 01770-0056, P18220 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 65345?
65345 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-519-4636. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 65345

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026