PartsTable
Technical Data Sheet
Download PDF

653124-1 — CAP,PROTECTIVE,DUST AND MOISTURE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

653124-1: CAP,PROTECTIVE,DUST AND MOISTURE.

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: STEEL CORROSION RESISTING, design_type: THREADED, thread_class: 2B, overall_diameter: 0.750 INCHES NOMINAL IN, surface_treatment: CADMIUM, inside_diameter_length: 0.400 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-183-0464, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
653124-1
NSN: 5340-01-183-0464
FSC: 5340 — Hardware, Commercial
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
design_typeTHREADED
thread_class2B
overall_diameter0.750 INCHES NOMINAL IN
surface_treatmentCADMIUM
inside_diameter_length0.400 INCHES NOMINAL IN
round_cap_outside_surface_conditionKNURLED
thread_size_and_series/type_designator18 UNS
opening_inside_diameter_for_which_designed0.650 INCHES NOMINAL IN
connector_nominal_thread_size_for_which_designed0.625 INCHES IN
NSN5340-01-183-0464
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 653124-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: THREADED
•
OVERALL DIAMETER: 0.750 INCHES NOMINAL IN
•
CONNECTOR NOMINAL THREAD SIZE FOR WHICH DESIGNED: 0.625 INCHES IN
•
OPENING INSIDE DIAMETER FOR WHICH DESIGNED: 0.650 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM
•
THREAD CLASS: 2B
•
MATERIAL: STEEL CORROSION RESISTING
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 18 UNS
TECHNICAL CHARACTERISTICS
DESIGN TYPETHREADED
OVERALL DIAMETER0.750 INCHES NOMINAL IN
CONNECTOR NOMINAL THREAD SIZE FOR WHICH DESIGNED0.625 INCHES IN
OPENING INSIDE DIAMETER FOR WHICH DESIGNED0.650 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM
THREAD CLASS2B
MATERIALSTEEL CORROSION RESISTING
THREAD SIZE AND SERIES/TYPE DESIGNATOR18 UNS
INSIDE DIAMETER LENGTH0.400 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITIONKNURLED
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 653124-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 653124-1?
653124-1 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What is the NSN for 653124-1?
653124-1 is cataloged in the U.S. Government catalog under NSN 5340-01-183-0464. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 653124-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.