PartsTable
Technical Data Sheet
Download PDF

6531-10-102-3101 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6531-10-102-3101: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.290 INCHES NOMINAL IN, length: 0.650 INCHES NOMINAL IN, material: COPPER ALLOY 510 OR COPPER ALLOY 524 OR COPPER ALLOY 544 OVERALL, hole_diameter: 0.125 INCHES NOMINAL IN, overall_height: 0.280 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-124-0820, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6531-10-102-3101
NSN: 5340-01-124-0820
FSC: 5340 — Hardware, Commercial
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
width0.290 INCHES NOMINAL IN
length0.650 INCHES NOMINAL IN
materialCOPPER ALLOY 510 OR COPPER ALLOY 524 OR COPPER ALLOY 544 OVERALL
hole_diameter0.125 INCHES NOMINAL IN
overall_height0.280 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
material_thickness0.012 INCHES NOMINAL IN
material_document_and_classificationQQ-A-750 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5340-01-124-0820
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6531-10-102-3101 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.650 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-750 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL THICKNESS: 0.012 INCHES NOMINAL IN
•
WIDTH: 0.290 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY 510 OR COPPER ALLOY 524 OR COPPER ALLOY 544 OVERALL
•
HOLE DIAMETER: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.280 INCHES NOMINAL IN
LENGTH0.650 INCHES NOMINAL IN
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-750 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS0.012 INCHES NOMINAL IN
WIDTH0.290 INCHES NOMINAL IN
MATERIALCOPPER ALLOY 510 OR COPPER ALLOY 524 OR COPPER ALLOY 544 OVERALL
HOLE DIAMETER0.125 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 6531-10-102-3101?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6531-10-102-3101?
6531-10-102-3101 is a CLIP,SPRING TENSION.
What is the NSN for 6531-10-102-3101?
6531-10-102-3101 is cataloged in the U.S. Government catalog under NSN 5340-01-124-0820. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6531-10-102-3101

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.