6530NCM040242: PATIENT WARMING.
The PATIENT WARMING is a the manufacturer industrial component. Key specifications include part_name_assigned_by_controlling_agency: PATIENT WARMING FORCED AIR TEMPERATURE MANAGEMENT UNIT. This part is cataloged in the U.S.
Government catalog under NSN 6530-01-519-4798, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| part_name_assigned_by_controlling_agency | PATIENT WARMING FORCED AIR TEMPERATURE MANAGEMENT UNIT |
| NSN | 6530-01-519-4798 |
| SUPPLEMENTARY FEATURES | THE UNIT SHALL BE PROVIDED WITH AT LEAST 10 BLANKETS (EA): UPPER BODY, LOWER BODY, AND TORSO. A MINMUM 6.0 FT LONG, 3 IN. HOSE SHALL BE INCLUDED TO CONNECT THE UNIT TO THE BLANKETS; UNIT SHALL BE PROVIDED WITH A SPARE HOSE, HOSE CLIP, SHEET CLIP AND AIR FILTER (HIGH EFFICIENCY FILTER CAPABLE OF WITHSTANDING HAZARDS OF NORMAL USE IN A HOSPITAL SETTING; UNIT SHALL BE TRANSPORTED IN A HARDENED, REUSABLE CARRYING CASE; 2 OPERATORS MANUALS AND TWO SERVICE MANUALS SHALL BE SUPPLIED WITH EACH UNIT IN |
| SPECIAL FEATURES | SHALL BE A PATIENT TEMP MANAGEMENT SYSTEM DESIGNED TO REGULATE PATIENT TEMPERATURE BY THE APPLICATION OF A HYPERTHERMIA BLANKET THRU WHICH TEMP-CONTROLLED AIR IS CIRCULATED; THE TEMP CONTROL SHALL PROVIDE MIN OF 3 AIR TEMP SETTINGS BETWEEN 32 AND 43 DEG C (89.6A& 109.4 DEG F); SYSTEM SHALL PROVIDE MINIMUM FLOWRATE OF 25 CFM; AN OVER TEMP VISUAL & AUDIBLE ALARM SHALL ACTIVATE WHEN AIR TEMP EXCEEDS 53 DEG C (127.4 DEG F); HEAT SHALL AUTOMATICALLY SHUTDOWN BY AN OVER-TEMP CONDITION; OPERATION OF PATIENT WARMER SHALL NOT BE ADVERSELY AFFECTED BY ELECTROMAGNETIC INTERFERENCE (I.E. OPERATION OF ELECTROSURGICAL UNIT); SHALL WEIGH LESS THAN 15 LBS; BE FREESTANDING OR ATTACHABLE TO IV POLE; THE UNIT SHALL BE CAPABLE OF QUIET OPERATION W/NOISE LEVELS < 60DB(A) MEASURED 3-FT FROM UNIT; SHALL OPERATE ON 120 VOLTS; SHALL BE SUPPLIED W/NATIONALLY RECOGNIZED LAB (LIKE UL)APPROVED; 3-WIRE POWER CORD & PLUG SUITABLE FOR HOSPITAL ENVIRONMENTS A |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | PATIENT WARMING FORCED AIR TEMPERATURE MANAGEMENT UNIT |