PartsTable
Technical Data Sheet
Download PDF

6530-21-201-1121 — LEAF,BUTT HINGE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6530-21-201-1121: LEAF,BUTT HINGE.

The LEAF,BUTT HINGE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, hinge_pin: NOT INCLUDED, knuckle_type: FRICTION, knuckle_length: 0.491 INCHES MINIMUM AND 0.495 INCHES MAXIMUM IN, overall_length: 49.265 INCHES NOMINAL IN, knuckle_quantity: 33. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-023-9444, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6530-21-201-1121
NSN: 5340-00-023-9444
FSC: 5340 — Hardware, Commercial
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
hinge_pinNOT INCLUDED
knuckle_typeFRICTION
knuckle_length0.491 INCHES MINIMUM AND 0.495 INCHES MAXIMUM IN
overall_length49.265 INCHES NOMINAL IN
knuckle_quantity33
style_designatorBUTT PARALLEL HOLES
material_thickness0.090 INCHES NOMINAL IN
reversible_featureNOT INCLUDED
hinge_mounting_typeFULL SURFACE
mounting_hole_diameter0.098 INCHES NOMINAL IN
mounting_hole_quantity40
NSN5340-00-023-9444
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6530-21-201-1121 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 40
•
REVERSIBLE FEATURE: NOT INCLUDED
•
KNUCKLE INSIDE DIAMETER: 0.093 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: BUTT PARALLEL HOLES
•
MOUNTING HOLE DIAMETER: 0.098 INCHES NOMINAL IN
•
HINGE MOUNTING TYPE: FULL SURFACE
•
HINGE PIN: NOT INCLUDED
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY40
REVERSIBLE FEATURENOT INCLUDED
KNUCKLE INSIDE DIAMETER0.093 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
STYLE DESIGNATORBUTT PARALLEL HOLES
MOUNTING HOLE DIAMETER0.098 INCHES NOMINAL IN
OVERALL LENGTH49.265 INCHES NOMINAL IN
HINGE MOUNTING TYPEFULL SURFACE
HINGE PINNOT INCLUDED
MATERIAL THICKNESS0.090 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH1.250 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 6530-21-201-1121?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6530-21-201-1121?
6530-21-201-1121 is a LEAF,BUTT HINGE.
What is the NSN for 6530-21-201-1121?
6530-21-201-1121 is cataloged in the U.S. Government catalog under NSN 5340-00-023-9444. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6530-21-201-1121