The Ct Auto Injector System, cataloged under National Stock Number 6525-01-426-6753, is classified within Federal Supply Class 6525 (Imaging Equipment and Supplies: Medical, Dental, Veterinary) of the Medical, Dental, and Veterinary Equipment group. The manufacturer of record is Liebel-Flarsheim Company Llc. Government technical data includes 1 specification, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 6525-01-426-6753 |
| Primary Part Number | CT9017M |
| Item Name | Ct Auto Injector System |
| FSC / FSG | 6525 / 65 — Imaging Equipment and Supplies: Medical, Dental, Veterinary |
| Manufacturer | Liebel-Flarsheim Company Llc |
| Status | ACTIVE |
| General Characteristics Item Description | CONSISTS OF: OPERATOR CONSOLE, 1EA; INJECTOR POWERHEAD, 1 EA; ELECTRONICS POWER CABINET; REMOTE CT AUTO INJECTOR STAND, 1EA; 200 ML FRONT LOADING SYSTEM, 1 EA; 125 ML BREACH LOADING SYSTEM, 1 EA; OPERATING SOFTWARE; TECH MANUALS; AND A STANDARD CABLE SET CONSISTING OF: A 7 FT. POWER CORD, A 50 FT. CONSOLE CABLE, AND A 50 FT. INJECTOR HEAD CABLE. THE SYSTEM HAS 110/220 VAC, 50/60 HZ CAPABILITY BUT THE REQUISITIONER MUST STATE THEIR REQUIREMENTS SO THE CORRECT POWER CORD CAN BE REQUESTED FOR THE SYSTEM. VAC |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Part Number | Manufacturer |
|---|---|
| CT9017M PRIMARY | Liebel-Flarsheim Company Llc (USA) |
| 9017M PRIMARY | Liebel-Flarsheim Company Llc (USA) |
| Reference | Meaning |
|---|---|
| CT9000 | 3/1 Design control — primary reference Liebel-Flarsheim Company Llc |
| 96-0127 | 5/1 Secondary reference U.S. Government activity |
NSN 6525-01-426-6753 is a Ct Auto Injector System, manufactured by Liebel-Flarsheim Company Llc, classified under FSC 6525, Imaging Equipment and Supplies: Medical, Dental, Veterinary. Status: active.
NSN 6525-01-426-6753 has 2 manufacturer part numbers on file: CT9017M (Liebel-Flarsheim Company Llc), 9017M (Liebel-Flarsheim Company Llc).
Key specifications for CT9017M: General Characteristics Item Description: CONSISTS OF: OPERATOR CONSOLE, 1EA; INJECTOR POWERHEAD, 1 EA; ELECTRONICS POWER CABINET; REMOTE CT AUTO INJECTOR STAND, 1EA; 200 ML FRONT LOADING SYSTEM, 1 EA; 125 ML BREACH LOADING SYSTEM, 1 EA; OPERATING SOFTWARE; TECH MANUALS; AND A STANDARD CABLE SET CONSISTING OF: A 7 FT. POWER CORD, A 50 FT. CONSOLE CABLE, AND A 50 FT. INJECTOR HEAD CABLE. THE SYSTEM HAS 110/220 VAC, 50/60 HZ CAPABILITY BUT THE REQUISITIONER MUST STATE THEIR REQUIREMENTS SO THE CORRECT POWER CORD CAN BE REQUESTED FOR THE SYSTEM. VAC; Special Features: MEMORY: 12 PRE-STORED PROTOCOLS WITH UP TO 4 PHASES PER PROTOCOL. INTERPHASE DELAY: 0-255 SECS IN 1 SEC INCREMENTS; SCAN DELAY: 0-99 SECS IN 1 SEC INCREMENTS W/AUDIBLE ALARM; PRESSURE LIMIT: 25-300 PSI IN 50 PSI INCREMENTS; FLOW RATE: 0.1-7.2 ML/SEC WITH 200 ML SYRINGE SYSTEM AND 0.1 TO 4.9 ML/SEC WITH 125 ML SYRINGE SYSTEM. VOLUME: 1-200 ML IN 1 ML INCREMENTS; FILL SPEED: APPROX. FROM 2-7.2 ML/SEC; SYRINGE HEATER: BLANKET TYPE...MAINTAINS PRE-HEATED CONTRAST AT 37 DEGREES C.; Part Name Assigned by Controlling Agency: CT AUTO INJECTOR SYSTEM. 1 specification is documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.