PartsTable
Technical Data Sheet
PartsTable / MRO / 65212
65212 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: ALUMINUM OVERALL, body_style: ROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACE, cone_width: 1.7500 INCHES NOMINAL IN, body_length: 0.500 INCHES MINIMUM AND 0.672 INCHES MAXIMUM IN, power_rating: 25.0 WATTS AVERAGE, thread_class: 2A A. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3639, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 65212
NSN: 3110-00-100-3639
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM OVERALL
body_styleROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACE
cone_width1.7500 INCHES NOMINAL IN
body_length0.500 INCHES MINIMUM AND 0.672 INCHES MAXIMUM IN
power_rating25.0 WATTS AVERAGE
thread_class2A A
bore_diameter2.2150 INCHES NOMINAL IN
terminal_typeTURRET
overall_length3.490 INCHES MAXIMUM IN
connection_typeTHREADED INTERNAL PIPE FIRST FLUID END CONNECTION
frequency_range0.000 HERTZ MINIMUM AND 18.000 GIGAHERTZ MAXIMUM
mounting_methodCONNECTOR
NSN3110-00-100-3639
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 65212 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE WIDTH: 1.7500 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 2.2150 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
TECHNICAL CHARACTERISTICS (FLIS)
CONE WIDTH1.7500 INCHES NOMINAL IN
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER2.2150 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
PPP02-1120Interchangeable
interchangeable cross-reference
interchangeable
65212Interchangeable
interchangeable cross-reference
interchangeable
P21120Interchangeable
interchangeable cross-reference
interchangeable
5935007620312Interchangeable
interchangeable cross-reference
interchangeable
450-3381-01-03-10Interchangeable
interchangeable cross-reference
interchangeable
276-1530P1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 65212?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 65212?
65212 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 65212?
There are 12 known substitutes for 65212: PPP02-1120, 65212, P21120 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 65212?
65212 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3639. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 65212

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026