The Mandrel,dental Handpiece, cataloged under National Stock Number 6520-00-935-9877, is classified within Federal Supply Class 6520 (No Item Name Available) of the Medical, Dental, and Veterinary Equipment group. The primary manufacturer of record is Coltene/whaledent Inc.. Government technical data includes 5 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 1 commercial cross-reference from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 6 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active. Unit of issue: PG.
| Parameter | Value |
|---|---|
| NSN | 6520-00-935-9877 |
| Primary Part Number | A-63-2 |
| Item Name | Mandrel,dental Handpiece |
| FSC / FSG | 6520 / 65 — No Item Name Available |
| Manufacturer | Coltene/whaledent Inc. |
| Status | ACTIVE |
| Handpiece Type for Which Designed | ANGLE |
| Design Type | SLOTTED |
| Supplementary Features | SHEARING; LATCH-TYPE; PIN-DRIVING TYPE HEAD; SHAFT RELIEVED TO PREVENT ENGAGEMENT BY HANDPIECE CHUCK; CONE-SHAPED CONTACT AREA PROVIDES CLUTCH ACTION; FOR USE W/HANDPIECE,6520-00-019-9267 AND PIN,6520-00-935-9867 |
| Shank Diameter | 0.0905 INCHES MINIMUM AND 0.0915 INCHES MAXIMUM IN |
| Head Diameter | 0.0905 INCHES MINIMUM AND 0.0915 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Unit of Issue | PG |
| Part Number | Manufacturer |
|---|---|
| A-63-2 | Coltene/whaledent Inc. (USA) |
NSN 6520-00-935-9877 is a Mandrel,dental Handpiece, manufactured by Coltene/whaledent Inc., classified under FSC 6520 (No Item Name Available). Status: active.
NSN 6520-00-935-9877 has 1 cross-referenced part number: A-63-2 (Coltene/whaledent Inc.).
There are 6 known substitutes for 6520-00-935-9877: 5306-00-273-6347, 6625-00-668-6892, 4320-00-879-2611 and 3 more. Verify interchangeability with system specifications before substitution.
Key specifications for A-63-2: Special Features: LATCH TYPE; LONG; PIN-DRIVING TYPE HEAD; FOR HOLDING AND DRIVING THREAD-FORMING PIN INTO PIN HOLES IN DENTIN OF TEETH FOR RETENTION OF RESTORATIONS IN THE THREAD FORMING TECHNIQUE; SHAFT RELIEVED TO PREVENT ENGAGEMENT BY HANDPIECE CHUCK; CONE-SHAPED CONTACT AREA PROVIDES CLUTCH ACTION; Part Name Assigned by Controlling Agency: MANDREL DENTAL HANDPIECE SHEARING LATCH-TYPE 2S; Handpiece Type for Which Designed: ANGLE; Design Type: SLOTTED. 8 total characteristics are documented in the Federal Logistics Information System.