PartsTable / COMPONENT / 6518J
6518J
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: CORK AND RESIN SYNTHETIC OR RESIN NATURAL OVERALL, outside_diameter: 1.120 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN, special_features: DIPPED IN A MIXTURE OF 100 VISCOSITY PARAFFIN OIL AND PETROLEUM SULFONATE OR EQUIVALENT, style_designator: CIRCULAR, aperture_diameter: 0.774 INCHES MINIMUM AND 0.794 INCHES MAXIMUM IN, cross-sectional_thickness: 0.250 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-282-8113, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
6518J
NSN: 5330-00-282-8113 FSC: 5330 CAGE: 08018 — BORG-WARNER CORP (USA)
SPECIFICATIONS
material CORK AND RESIN SYNTHETIC OR RESIN NATURAL OVERALL outside_diameter 1.120 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN special_features DIPPED IN A MIXTURE OF 100 VISCOSITY PARAFFIN OIL AND PETROLEUM SULFONATE OR EQUIVALENT style_designator CIRCULAR aperture_diameter 0.774 INCHES MINIMUM AND 0.794 INCHES MAXIMUM IN cross-sectional_thickness 0.250 INCHES NOMINAL IN cross-sectional_shape_style SOLID SINGLE OR COMPOSITION material_document_and_classification MIL-G-12803,NO. +2126-A MIL SPEC ALL MATERIAL RESPONSES OVERALL NSN 5330-00-282-8113
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 6518J
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL THICKNESS: 0.250 INCHES NOMINAL IN
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• APERTURE DIAMETER: 0.774 INCHES MINIMUM AND 0.794 INCHES MAXIMUM IN
• MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,NO. +2126-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
• MATERIAL: CORK AND RESIN SYNTHETIC OR RESIN NATURAL OVERALL
• STYLE DESIGNATOR: CIRCULAR
• OUTSIDE DIAMETER: 1.120 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS 0.250 INCHES NOMINAL IN CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION SPECIAL FEATURES DIPPED IN A MIXTURE OF 100 VISCOSITY PARAFFIN OIL AND PETROLEUM SULFONATE OR EQUIVALENT APERTURE DIAMETER 0.774 INCHES MINIMUM AND 0.794 INCHES MAXIMUM IN MATERIAL DOCUMENT AND CLASSIFICATION MIL-G-12803,NO. +2126-A MIL SPEC ALL MATERIAL RESPONSES OVERALL MATERIAL CORK AND RESIN SYNTHETIC OR RESIN NATURAL OVERALL STYLE DESIGNATOR CIRCULAR OUTSIDE DIAMETER 1.120 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
MS35387-2 Interchangeable interchangeable cross-reference
interchangeable
506102 Interchangeable interchangeable cross-reference
interchangeable
40618A Interchangeable interchangeable cross-reference
interchangeable
A1620 Interchangeable interchangeable cross-reference
interchangeable
MS15716-11 Interchangeable interchangeable cross-reference
interchangeable
17511 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 6518J?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6518J?
6518J is a GASKET.
What parts can replace 6518J?
There are 18 known substitutes for 6518J: MS35387-2, 506102, 40618A and 15 more. Substitute compatibility should be verified for your specific system.
Is 6518J still available?
6518J is currently cancelled.