PartsTable
Technical Data Sheet
Download PDF

65126 — FRAME,SPECIAL MOUNTING

✓ Government record, cited
Jumbo · ORING SEAL
PRODUCT OVERVIEW

65126: FRAME,SPECIAL MOUNTING.

The FRAME,SPECIAL MOUNTING is a Jumbo industrial component. Key specifications include supplementary_features: BURST TEST PRESSURE-250.0 LBS PER SQUARE INCH LBS, end_item_identification: 4110-01-534-7675, media_for_which_designed: FUEL/OIL, HYDROCARBON SINGLE RESPONSE, measuring_method_and_length: 25.000 INCHES NOMINAL OVERALL IN, part_name_assigned_by_controlling_agency: HOSE, NONMETALLIC. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-576-4203, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
65126
NSN: 5330-00-576-4203
NIINs: 005764203, 010110602, 010412266, 013573785, 014133397, 014215649, 015856521
FSC: 5330 — Packing and Gasket Materials
CAGE: 79150 — DANA AUTOMOTIVE SYSTEMS GROUP, LLC DBA DANA SEALING PRODUCTS (USA)
SPECIFICATIONS
supplementary_featuresBURST TEST PRESSURE-250.0 LBS PER SQUARE INCH LBS
end_item_identification4110-01-534-7675
media_for_which_designedFUEL/OIL, HYDROCARBON SINGLE RESPONSE
measuring_method_and_length25.000 INCHES NOMINAL OVERALL IN
part_name_assigned_by_controlling_agencyHOSE, NONMETALLIC
NSN5330-00-576-4203
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 65126 MFR: Jumbo ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
•
HOUSING BORE DIAMETER: 1.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
ACCOMMODATED SHAFT DIAMETER: 0.750 INCHES NOMINAL IN
•
MATERIAL: STEEL INTERNALLY MOLDED-IN REINFORCEMENT
•
CONSTRUCTION: SOLID
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
HOUSING BORE DIAMETER1.250 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
ACCOMMODATED SHAFT DIAMETER0.750 INCHES NOMINAL IN
MATERIALSTEEL INTERNALLY MOLDED-IN REINFORCEMENT
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
CONSTRUCTIONSOLID
SUBSTITUTES & CROSS-REFERENCES 2
12P296Reference document
Same NSN cross-reference
Reference document — Secondary reference
NP65126Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 65126?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 65126?
65126 is a FRAME,SPECIAL MOUNTING manufactured by Jumbo.
What parts can replace 65126?
There are 2 known substitutes for 65126: 12P296, NP65126. Substitute compatibility should be verified for your specific system.
What is the NSN for 65126?
65126 is cataloged in the U.S. Government catalog under NSN 5330-00-576-4203. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 65126