PartsTable
Technical Data Sheet
Download PDF

6510-21-115-5101 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6510-21-115-5101: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4340 OVERALL, end_radius: 0.875 INCHES NOMINAL IN, fork_depth: 1.250 INCHES NOMINAL IN, shank_length: 7.319 INCHES NOMINAL IN, overall_width: 1.255 INCHES NOMINAL IN, overall_height: 2.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-066-5011, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6510-21-115-5101
NSN: 5340-01-066-5011
FSC: 5340 — Hardware, Commercial
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 4340 OVERALL
end_radius0.875 INCHES NOMINAL IN
fork_depth1.250 INCHES NOMINAL IN
shank_length7.319 INCHES NOMINAL IN
overall_width1.255 INCHES NOMINAL IN
overall_height2.000 INCHES NOMINAL IN
shank_diameter1.247 INCHES NOMINAL IN
fork_span_width1.250 INCHES NOMINAL IN
style_designatorCLEVIS
surface_treatmentCADMIUM END PULL
fork_arm_thickness0.375 INCHES NOMINAL IN
shank_shoulder_length9.044 INCHES NOMINAL IN
NSN5340-01-066-5011
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6510-21-115-5101 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 1.247 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 1.250 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.375 INCHES NOMINAL IN
•
END RADIUS: 0.875 INCHES NOMINAL IN
•
SHANK LENGTH: 7.319 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
SHANK DIAMETER1.247 INCHES NOMINAL IN
OVERALL HEIGHT2.000 INCHES NOMINAL IN
FORK SPAN WIDTH1.250 INCHES NOMINAL IN
FORK ARM THICKNESS0.375 INCHES NOMINAL IN
END RADIUS0.875 INCHES NOMINAL IN
SHANK LENGTH7.319 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH1.255 INCHES NOMINAL IN
SHANK SHOULDER DIAMETER1.147 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 6510-21-115-5101?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6510-21-115-5101?
6510-21-115-5101 is a CLEVIS,ROD END.
What is the NSN for 6510-21-115-5101?
6510-21-115-5101 is cataloged in the U.S. Government catalog under NSN 5340-01-066-5011. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6510-21-115-5101