PartsTable
Technical Data Sheet
Download PDF

65102-1 — DETECTING-RANGING SET SUBASSEMBL

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

65102-1: DETECTING-RANGING SET SUBASSEMBL.

DETECTING-RANGING SET SUBASSEMBL. Key specifications include material: PLASTIC PHENOLIC OVERALL, body_style: PLAIN, SOLID, bore_style: PLAIN BOTH ENDS, tooth_form: STANDARD, pitch_diameter: 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN, pressure_angle: 20.0000 DEGREES. This part is cataloged in the U.S.

Government catalog under NSN 3020-00-001-6178, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 65102-1
NSN: 3020-00-001-6178
NIINs: 000016178, 004061913
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 05234 — THERMO JARRELL ASH CORP BAIRD DIV (USA)
SPECIFICATIONS
materialPLASTIC PHENOLIC OVERALL
body_stylePLAIN, SOLID
bore_stylePLAIN BOTH ENDS
tooth_formSTANDARD
pitch_diameter0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
pressure_angle20.0000 DEGREES
teeth_quantity48
special_featuresCRES INSERT IN HUB
style_designatorPROTRUDING HUB
face_nominal_width0.187 INCHES IN
hub_nominal_diameter0.375 INCHES FIRST END IN
hub_style_designatorPINNED FIRST END
NSN3020-00-001-6178
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available DETECTING-RANGING SET SUBASSEMBL TITLE COMPONENT PN 65102-1 MFR DETECTING-RANGING SET
KEY FEATURES
•
BORE NOMINAL DIAMETER: 0.187 INCHES BOTH ENDS IN
•
HUB NOMINAL DIAMETER: 0.375 INCHES FIRST END IN
•
TEETH QUANTITY: 48
•
BODY STYLE: PLAIN, SOLID
•
BORE STYLE: PLAIN BOTH ENDS
•
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END: 0.219 INCHES FIRST END IN
•
PRECISION CLASSIFICATION: QUALITY NUMBER 10
•
STYLE DESIGNATOR: PROTRUDING HUB
TECHNICAL CHARACTERISTICS
BORE NOMINAL DIAMETER0.187 INCHES BOTH ENDS IN
HUB NOMINAL DIAMETER0.375 INCHES FIRST END IN
TEETH QUANTITY48
BODY STYLEPLAIN, SOLID
BORE STYLEPLAIN BOTH ENDS
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END0.219 INCHES FIRST END IN
PRECISION CLASSIFICATIONQUALITY NUMBER 10
STYLE DESIGNATORPROTRUDING HUB
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-15035,TYPE FBE MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
PITCH DIAMETER0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
E31L48Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy 65102-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 65102-1?
65102-1 is a DETECTING-RANGING SET SUBASSEMBL. It is classified as a MRO (MRO_GENERAL).
What parts can replace 65102-1?
There is 1 known substitute for 65102-1: E31L48. Substitute compatibility should be verified for your specific system.
What is the NSN for 65102-1?
65102-1 is cataloged in the U.S. Government catalog under NSN 3020-00-001-6178. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 65102-1