PartsTable
Technical Data Sheet
Download PDF

6510-11-100-2103 — NUT,PLAIN,CONE SEAT,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

6510-11-100-2103: NUT,PLAIN,CONE SEAT,HEXAGON.

The NUT,PLAIN,CONE SEAT,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP E4340 OVERALL, nut_style: CONE SEAT, HEXAGON, nut_height: 1.031 INCHES NOMINAL IN, thread_class: 3B, thread_series: UN, cone_seat_angle: 14.0 DEGREES MINIMUM AND 15.0 DEGREES MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-755-1190, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6510-11-100-2103
NSN: 5310-00-755-1190
FSC: 5310 — Nuts and Washers
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL COMP E4340 OVERALL
nut_styleCONE SEAT, HEXAGON
nut_height1.031 INCHES NOMINAL IN
thread_class3B
thread_seriesUN
cone_seat_angle14.0 DEGREES MINIMUM AND 15.0 DEGREES MAXIMUM
thread_directionLEFT-HAND
width_across_flats1.312 INCHES NOMINAL IN
nominal_thread_size0.875 INCHES IN
thread_quantity_per_inch32
material_document_and_classificationMIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-755-1190
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 6510-11-100-2103 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.312 INCHES NOMINAL IN
•
THREAD SERIES: UN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: LEFT-HAND
•
NOMINAL THREAD SIZE: 0.875 INCHES IN
•
CONE SEAT ANGLE: 14.0 DEGREES MINIMUM AND 15.0 DEGREES MAXIMUM
•
NUT HEIGHT: 1.031 INCHES NOMINAL IN
•
NUT STYLE: CONE SEAT, HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.312 INCHES NOMINAL IN
THREAD SERIESUN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONLEFT-HAND
NOMINAL THREAD SIZE0.875 INCHES IN
CONE SEAT ANGLE14.0 DEGREES MINIMUM AND 15.0 DEGREES MAXIMUM
NUT HEIGHT1.031 INCHES NOMINAL IN
NUT STYLECONE SEAT, HEXAGON
THREAD CLASS3B
THREAD QUANTITY PER INCH32
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 6510-11-100-2103?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6510-11-100-2103?
6510-11-100-2103 is a NUT,PLAIN,CONE SEAT,HEXAGON.
What is the NSN for 6510-11-100-2103?
6510-11-100-2103 is cataloged in the U.S. Government catalog under NSN 5310-00-755-1190. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6510-11-100-2103