PartsTable
Technical Data Sheet
Download PDF

6507-02-015-3041 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6507-02-015-3041: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 7075, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: CHAMFERED ENDS, first_leg_width: 4.380 INCHES NOMINAL IN, first_leg_length: 1.190 INCHES NOMINAL IN, second_leg_style: END RADIUS AND TAPERED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-305-9525, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6507-02-015-3041
NSN: 5340-01-305-9525
FSC: 5340 — Hardware, Commercial
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 7075
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleCHAMFERED ENDS
first_leg_width4.380 INCHES NOMINAL IN
first_leg_length1.190 INCHES NOMINAL IN
second_leg_styleEND RADIUS AND TAPERED
second_leg_width4.380 INCHES NOMINAL IN
special_featuresINCLUDES 1 BUSHING
style_designatorANGLE
second_leg_length1.220 INCHES NOMINAL IN
mounting_hole_typePLAIN
first_leg_end_width3.880 INCHES NOMINAL IN
NSN5340-01-305-9525
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6507-02-015-3041 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.380 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.3746 INCHES MINIMUM AND 0.3751 INCHES MAXIMUM IN
•
SECOND LEG WIDTH: 4.380 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 1.220 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: NO HOLE
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 2.510 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.380 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.3746 INCHES MINIMUM AND 0.3751 INCHES MAXIMUM IN
SECOND LEG WIDTH4.380 INCHES NOMINAL IN
SECOND LEG LENGTH1.220 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLENO HOLE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH2.510 INCHES NOMINAL IN
FIRST LEG END WIDTH3.880 INCHES NOMINAL IN
STYLE DESIGNATORANGLE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy 6507-02-015-3041?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6507-02-015-3041?
6507-02-015-3041 is a BRACKET,ANGLE.
What is the NSN for 6507-02-015-3041?
6507-02-015-3041 is cataloged in the U.S. Government catalog under NSN 5340-01-305-9525. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6507-02-015-3041

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.