PartsTable
Technical Data Sheet
Download PDF

650270PC5 — BOLT,INTERNAL WRENCHING

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

650270PC5: BOLT,INTERNAL WRENCHING.

The BOLT,INTERNAL WRENCHING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_type: DRILLED, head_style: FLAT CHAMFER, head_height: 0.306 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.457 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-00-598-8329, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
650270PC5
NSN: 5306-00-598-8329
FSC: 5306 — Bolts
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_typeDRILLED
head_styleFLAT CHAMFER
head_height0.306 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.457 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
hole_diameter0.047 INCHES NOMINAL IN
hole_quantity6
thread_length0.762 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
fastener_length0.845 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
hardness_rating38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
NSN5306-00-598-8329
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 650270PC5 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.250 INCHES MINIMUM AND 0.253 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.306 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.845 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.762 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
•
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
•
HOLE CONFIGURATION STYLE: ROUND LONGITUDINAL HOLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.250 INCHES MINIMUM AND 0.253 INCHES MAXIMUM IN
HEAD HEIGHT0.306 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
FASTENER LENGTH0.845 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
THREAD LENGTH0.762 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
HARDNESS RATING38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HOLE CONFIGURATION STYLEROUND LONGITUDINAL HOLE
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
SUBSTITUTES & CROSS-REFERENCES 3
MS24678-33Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS24678-33CReference document
Same NSN cross-reference
Reference document — Secondary reference
FF-S-86Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 650270PC5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 650270PC5?
650270PC5 is a BOLT,INTERNAL WRENCHING.
What parts can replace 650270PC5?
There are 3 known substitutes for 650270PC5: MS24678-33, MS24678-33C, FF-S-86. Substitute compatibility should be verified for your specific system.
What is the NSN for 650270PC5?
650270PC5 is cataloged in the U.S. Government catalog under NSN 5306-00-598-8329. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 650270PC5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.