650207PC1 — WASHER,FLAT

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

650207PC1: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, thickness: 0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN, hole_diameter: 0.4375 INCHES NOMINAL IN, hardness_rating: 75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM, overall_diameter: 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-285-9635, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

650207PC1

NSN: 5310-00-285-9635
FSC: 5310 — Nuts and Washers
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)

SPECIFICATIONS

material	RUBBER SYNTHETIC OVERALL
thickness	0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
hole_diameter	0.4375 INCHES NOMINAL IN
hardness_rating	75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM
overall_diameter	0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
peripheral_shape_style	ROUND
center_hole_shape_style	ROUND
minimum_tensile_strength	1500 POUNDS PER SQUARE INCH LBS
cross-sectional_shape_style	RECTANGULAR
material_document_and_classification	417,GR SB815BE3 MIL STD SINGLE MATERIAL RESPONSE OVERALL
NSN	5310-00-285-9635

COMPONENT DIAGRAM

KEY FEATURES

•

OVERALL DIAMETER: 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN

•

HARDNESS RATING: 75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM

•

MATERIAL DOCUMENT AND CLASSIFICATION: 417,GR SB815BE3 MIL STD SINGLE MATERIAL RESPONSE OVERALL

•

CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR

•

MINIMUM TENSILE STRENGTH: 1500 POUNDS PER SQUARE INCH LBS

•

PERIPHERAL SHAPE STYLE: ROUND

•

MATERIAL: RUBBER SYNTHETIC OVERALL

•

CENTER HOLE SHAPE STYLE: ROUND

TECHNICAL CHARACTERISTICS

OVERALL DIAMETER	0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
HARDNESS RATING	75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	417,GR SB815BE3 MIL STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
MINIMUM TENSILE STRENGTH	1500 POUNDS PER SQUARE INCH LBS
PERIPHERAL SHAPE STYLE	ROUND
MATERIAL	RUBBER SYNTHETIC OVERALL
CENTER HOLE SHAPE STYLE	ROUND
HOLE DIAMETER	0.4375 INCHES NOMINAL IN
THICKNESS	0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN

OTHER ITEMS IN FSC 5310 — Nuts and Washers

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540

SUBSTITUTES & CROSS-REFERENCES 1

5310PL1236049Reference document

Same NSN cross-reference

Reference document — Informative reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 650207PC1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 650207PC1?

650207PC1 is a WASHER,FLAT.

What parts can replace 650207PC1?

There is 1 known substitute for 650207PC1: 5310PL1236049. Substitute compatibility should be verified for your specific system.

What is the NSN for 650207PC1?

650207PC1 is cataloged in the U.S. Government catalog under NSN 5310-00-285-9635. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

650207PC1 — WASHER,FLAT

Request a Quote — 650207PC1