PartsTable
Technical Data Sheet
Download PDF

65010C428-8 — NUT,SELF-LOCKING,BLIND RIVET

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

65010C428-8: NUT,SELF-LOCKING,BLIND RIVET.

The NUT,SELF-LOCKING,BLIND RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OR STEEL COMP 305 OVERALL, nut_style: BLIND RIVET W/SMOOTH ROUND SHANK, head_style: ELIPTICAL COUNTERSUNK, nut_length: 1.347 INCHES MINIMUM AND 1.377 INCHES MAXIMUM IN, head_height: 0.040 INCHES NOMINAL IN, temp_rating: 450.0 FAHRENHEIT NOMINAL DEGF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-047-2139, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
65010C428-8
NSN: 5310-00-047-2139
FSC: 5310 — Nuts and Washers
CAGE: 56878 — SPS TECHNOLOGIES, LLC DBA PB FASTENERS (USA)
SPECIFICATIONS
materialSTEEL COMP 304 OR STEEL COMP 305 OVERALL
nut_styleBLIND RIVET W/SMOOTH ROUND SHANK
head_styleELIPTICAL COUNTERSUNK
nut_length1.347 INCHES MINIMUM AND 1.377 INCHES MAXIMUM IN
head_height0.040 INCHES NOMINAL IN
temp_rating450.0 FAHRENHEIT NOMINAL DEGF
nut_diameter0.325 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
nut_grip_range+0.460 TO 0.520 INCHES IN
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
NSN5310-00-047-2139
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 65010C428-8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.040 INCHES NOMINAL IN
•
HEAD MINOR COUNTERSINK ANGLE: 59.45 DEGREES MINIMUM AND 60.15 DEGREES MAXIMUM
•
NUT LENGTH: 1.347 INCHES MINIMUM AND 1.377 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
TEMP RATING: 450.0 FAHRENHEIT NOMINAL DEGF
•
NUT GRIP RANGE: +0.460 TO 0.520 INCHES IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.040 INCHES NOMINAL IN
HEAD MINOR COUNTERSINK ANGLE59.45 DEGREES MINIMUM AND 60.15 DEGREES MAXIMUM
NUT LENGTH1.347 INCHES MINIMUM AND 1.377 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
TEMP RATING450.0 FAHRENHEIT NOMINAL DEGF
NUT GRIP RANGE+0.460 TO 0.520 INCHES IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE OVERALL
HEAD STYLEELIPTICAL COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
C858P428-8Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 65010C428-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 65010C428-8?
65010C428-8 is a NUT,SELF-LOCKING,BLIND RIVET.
What parts can replace 65010C428-8?
There is 1 known substitute for 65010C428-8: C858P428-8. Substitute compatibility should be verified for your specific system.
What is the NSN for 65010C428-8?
65010C428-8 is cataloged in the U.S. Government catalog under NSN 5310-00-047-2139. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 65010C428-8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.