PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 65-8-60
65-8-60 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CALIPER,SLIDE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, jaw_depth: 1.375 INCHES NOMINAL IN, measurement_system: ENGLISH AND METRIC, inside_measurement_range: +0.250 TO 4.000 INCHES IN, nib_closed_position_width: 0.236 INCHES IN, outside_measurement_range: +0.000 TO 3.750 INCHES IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-062-8192, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
65-8-60
NSN: 5330-00-062-8192
FSC: 5330
CAGE: 54957 — SIMPLEX CUTTING MACHINE CO INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
jaw_depth1.375 INCHES NOMINAL IN
measurement_systemENGLISH AND METRIC
inside_measurement_range+0.250 TO 4.000 INCHES IN
nib_closed_position_width0.236 INCHES IN
outside_measurement_range+0.000 TO 3.750 INCHES IN
NSN5330-00-062-8192
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 65-8-60 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS (FLIS)
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
65-8-60Interchangeable
interchangeable cross-reference
interchangeable
65-8-80Interchangeable
interchangeable cross-reference
interchangeable
1025ME-130Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 65-8-60?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 65-8-60?
65-8-60 is a CALIPER,SLIDE.
What parts can replace 65-8-60?
There are 3 known substitutes for 65-8-60: 65-8-60, 65-8-80, 1025ME-130. Substitute compatibility should be verified for your specific system.
What is the NSN for 65-8-60?
65-8-60 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-062-8192. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 65-8-60

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026