PartsTable
Technical Data Sheet
PartsTable / MRO / 65-5-4
65-5-4 ✓ Verified by PartsTable
PanzerGlass · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

Protect your phone from the hazards of everyday life with PanzerGlass®. Accidental bumps against sharp-edged dangers in your pocket or crushing falls onto stone-hard pavements are no match for this scratch and shock-resistant screen protector. The screen protector is easy to apply and once installed, you’ll never again fear the sight of your phone tumbling to the ground.

This may never happen, but if it does, you’ll regret not having clicked “add to cart”.<br><br><br>The Edge-to-Edge screen protector covers the entire front surface of your phone, while leaving room for a case. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-011-2304, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 65-5-4
NSN: 4730-00-011-2304
FSC: 4730
CAGE: 63327 — MCNALLY INDUSTRIES LLC DIV NORTHERN PUMP DIVISION (USA)
SPECIFICATIONS
colorBLACK
handleFURNISHED
length4.000 INCHES NOMINAL IN
diameter0.250 INCHES NOMINAL IN
markings4 INCH STD IN
materialRUBBER NEOPRENE OVERALL
end_shapeSPHERICAL
body_width0.165 INCHES MAXIMUM IN
head_stylePAN NO. 2
body_height0.460 INCHES NOMINAL IN
body_length1.300 INCHES NOMINAL IN
grip_length0.062 INCHES NOMINAL IN
NSN4730-00-011-2304
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 65-5-4 · PanzerGlass ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
4730PL0773105Interchangeable
interchangeable cross-reference
interchangeable
2EH663Interchangeable
interchangeable cross-reference
interchangeable
1596848P1REV1Interchangeable
interchangeable cross-reference
interchangeable
13027292-3Interchangeable
interchangeable cross-reference
interchangeable
2673205-3Interchangeable
interchangeable cross-reference
interchangeable
1-093Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 65-5-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 65-5-4?
65-5-4 is a BACKSHELL,ELECTRICAL CONNECTOR manufactured by PanzerGlass. It is classified as a MRO (MRO_GENERAL).
What parts can replace 65-5-4?
There are 27 known substitutes for 65-5-4: 4730PL0773105, 2EH663, 1596848P1REV1 and 24 more. Substitute compatibility should be verified for your specific system.
Is 65-5-4 still available?
65-5-4 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 65-5-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026