PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 65-15
65-15 ✓ Verified by PartsTable
Xerox · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

If you need to extend the VESA spec of the M Public Video Wall Mount Push SD 150kg Max to 900x600 this bracket is needed.<br>Made out of a steel structure, these extenders are made for VESA 400X400 and painted with epoxy powders. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-6193, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
65-15
NSN: 3110-00-100-6193
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialOVERALL PLASTIC ACETAL HOMOPOLYMER,DELRIN,SPERRY FLIGHT SYSTEMS CORP
head_stylePAN NO. 2
head_height0.045 INCHES NOMINAL IN
thread_class2A A
head_diameter0.173 INCHES NOMINAL IN
terminal_typeSOLDER LUG
thread_length0.125 INCHES NOMINAL IN
overall_height0.375 INCHES NOMINAL IN
overall_length0.750 INCHES NOMINAL IN
screw_materialSTEEL CORROSION RESISTING
fastener_length0.125 INCHES NOMINAL IN
inside_diameter0.125 INCHES NOMINAL IN
NSN3110-00-100-6193
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 65-15 · Xerox ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
ROLLING ELEMENT DIAMETER: 0.8120 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
SPECIAL FEATURESMETALLIC HARDNESS RATING ROCKWELL C MIN 60.0 IN. AND MAX 67.0 IN. IN
ROLLING ELEMENT DIAMETER0.8120 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
6515Interchangeable
interchangeable cross-reference
interchangeable
6516Interchangeable
interchangeable cross-reference
interchangeable
120063Interchangeable
interchangeable cross-reference
interchangeable
25222Interchangeable
interchangeable cross-reference
interchangeable
293934PC1Interchangeable
interchangeable cross-reference
interchangeable
57851Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 65-15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 65-15?
65-15 is a CONNECTOR,PLUG,ELECTRICAL manufactured by Xerox.
What parts can replace 65-15?
There are 20 known substitutes for 65-15: 6515, 6516, 120063 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 65-15?
65-15 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-6193. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 65-15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026