PartsTable
Technical Data Sheet
Download PDF

65-10540-34 — CABLE ASSEMBLY,SPECIAL PURPOSE,E

✓ Government record, cited
— · PIPE SECTION
PRODUCT OVERVIEW

65-10540-34: CABLE ASSEMBLY,SPECIAL PURPOSE,E.

CABLE ASSEMBLY,SPECIAL PURPOSE,E. Key specifications include material: STEEL CORROSION RESISTING TUBING, design_form: PREBENT, wall_thickness: 0.035 INCHES NOMINAL IN, thread_direction: RIGHT-HAND SINGLE END, mating_end_quantity: 2 SINGLE END, tube_outside_diameter: 1.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4710-00-877-1809, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
65-10540-34
NSN: 4710-00-877-1809
FSC: 4710 — Pipe, Tube and Rigid Tubing
CAGE: 81205 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING TUBING
design_formPREBENT
wall_thickness0.035 INCHES NOMINAL IN
thread_directionRIGHT-HAND SINGLE END
mating_end_quantity2 SINGLE END
tube_outside_diameter1.000 INCHES NOMINAL IN
end_connection_spec/stdNAS,NAS596,PART NO. NAS596-16
NSN4710-00-877-1809
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 65-10540-34 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN FORM: PREBENT
•
MATING END QUANTITY: 2 SINGLE END
•
WALL THICKNESS: 0.035 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND SINGLE END
•
TUBE OUTSIDE DIAMETER: 1.000 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING TUBING
•
END CONNECTION SPEC/STD: NAS,NAS596,PART NO. NAS596-16
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS
DESIGN FORMPREBENT
MATING END QUANTITY2 SINGLE END
WALL THICKNESS0.035 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND SINGLE END
TUBE OUTSIDE DIAMETER1.000 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING TUBING
END CONNECTION SPEC/STDNAS,NAS596,PART NO. NAS596-16
SUBSTITUTES & CROSS-REFERENCES 2
65-11687-161Reference document
Same NSN cross-reference
Reference document — Secondary reference
65-10540Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy 65-10540-34?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 65-10540-34?
65-10540-34 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E.
What parts can replace 65-10540-34?
There are 2 known substitutes for 65-10540-34: 65-11687-161, 65-10540. Substitute compatibility should be verified for your specific system.
What is the NSN for 65-10540-34?
65-10540-34 is cataloged in the U.S. Government catalog under NSN 4710-00-877-1809. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 65-10540-34

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.