PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 64FHZ48PP
64FHZ48PP ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.7500 INCHES NOMINAL IN, overall_width: 0.6550 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND, outer_ring_width: 0.5310 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-366-3623, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
64FHZ48PP
NSN: 3110-01-366-3623
FSC: 3110
CAGE: 49740 — LUTCO BEARINGS INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.7500 INCHES NOMINAL IN
overall_width0.6550 INCHES NOMINAL IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
outer_ring_width0.5310 INCHES NOMINAL IN
special_featuresBEARING HAS A HEX BORE,AND IS PRELUBRICATED WITH MULTI-PURPOSE GREASE
flange_outside_diameter2.1250 INCHES NOMINAL IN
outer_ring_outside_diameter2.0000 INCHES NOMINAL IN
NSN3110-01-366-3623
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 64FHZ48PP · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.7500 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
LOAD DIRECTION: RADIAL
•
OUTER RING OUTSIDE DIAMETER: 2.0000 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
SEAL QUANTITY: 2
•
FLANGE OUTSIDE DIAMETER: 2.1250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.7500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
LOAD DIRECTIONRADIAL
OUTER RING OUTSIDE DIAMETER2.0000 INCHES NOMINAL IN
SURFACE FINISHGROUND
SPECIAL FEATURESBEARING HAS A HEX BORE,AND IS PRELUBRICATED WITH MULTI-PURPOSE GREASE
SEAL QUANTITY2
FLANGE OUTSIDE DIAMETER2.1250 INCHES NOMINAL IN
OUTER RING WIDTH0.5310 INCHES NOMINAL IN
OVERALL WIDTH0.6550 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
305581Interchangeable
interchangeable cross-reference
interchangeable
3055Interchangeable
interchangeable cross-reference
interchangeable
SW24782Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 64FHZ48PP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 64FHZ48PP?
64FHZ48PP is a BEARING,BALL,ANNULAR.
What parts can replace 64FHZ48PP?
There are 3 known substitutes for 64FHZ48PP: 305581, 3055, SW24782. Substitute compatibility should be verified for your specific system.
What is the NSN for 64FHZ48PP?
64FHZ48PP is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-366-3623. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 64FHZ48PP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026