PartsTable
Technical Data Sheet
Download PDF

64A98B648-1 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

64A98B648-1: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.625 INCHES NOMINAL IN, length: 1.625 INCHES NOMINAL IN, material: STEEL OVERALL, hole_diameter: 0.312 INCHES NOMINAL IN, overall_height: 1.250 INCHES NOMINAL IN, surface_treatment: ZINC AND CHROMATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-060-9344, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
64A98B648-1
NSN: 5340-00-060-9344
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
width0.625 INCHES NOMINAL IN
length1.625 INCHES NOMINAL IN
materialSTEEL OVERALL
hole_diameter0.312 INCHES NOMINAL IN
overall_height1.250 INCHES NOMINAL IN
surface_treatmentZINC AND CHROMATE OVERALL
material_thickness0.032 INCHES NOMINAL IN
loop/holding_dimension0.750 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
end_item_identificationW/S: AIRCRAFT, F-16; RECOVERY VEHICLE, FULL-TRACKED MEDIUM, W/E (M88A1); ARMORED VEHICLE LAUNCH BRIDGE (M60A1 &M48A5); TRUCK, FIRE/CRASH P10; RECOVERY VEHICLE FU; VEHICLE, RECOVERY M-88 SERIES
NSN5340-00-060-9344
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 64A98B648-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.625 INCHES NOMINAL IN
•
LOOP/HOLDING DIMENSION: 0.750 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC AND CHROMATE OVERALL
•
WIDTH: 0.625 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.250 INCHES NOMINAL IN
LENGTH1.625 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION0.750 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
SURFACE TREATMENTZINC AND CHROMATE OVERALL
WIDTH0.625 INCHES NOMINAL IN
END ITEM IDENTIFICATIONW/S: AIRCRAFT, F-16; RECOVERY VEHICLE, FULL-TRACKED MEDIUM, W/E (M88A1); ARMORED VEHICLE LAUNCH BRIDGE (M60A1 &M48A5); TRUCK, FIRE/CRASH P10; RECOVERY VEHICLE FU; VEHICLE, RECOVERY M-88 SERIES
MATERIALSTEEL OVERALL
HOLE DIAMETER0.312 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
225LReference document
Same NSN cross-reference
Reference document — Design control — primary reference
5340000609344Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 64A98B648-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 64A98B648-1?
64A98B648-1 is a CLIP,SPRING TENSION.
What parts can replace 64A98B648-1?
There are 2 known substitutes for 64A98B648-1: 225L, 5340000609344. Substitute compatibility should be verified for your specific system.
What is the NSN for 64A98B648-1?
64A98B648-1 is cataloged in the U.S. Government catalog under NSN 5340-00-060-9344. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 64A98B648-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.