PartsTable
Technical Data Sheet
Download PDF

64A98B252 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

64A98B252: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4145H OVERALL, surface_finish: 83.0 MICROINCHES BOTH ENDS, first_end_style: CHAMFERED, pin_overall_length: 3.157 INCHES MINIMUM AND 3.188 INCHES MAXIMUM IN, pin_overall_diameter: 0.4980 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, first_end_taper_angle: 45.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-116-7609, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
64A98B252
NSN: 5315-00-116-7609
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL COMP 4145H OVERALL
surface_finish83.0 MICROINCHES BOTH ENDS
first_end_styleCHAMFERED
pin_overall_length3.157 INCHES MINIMUM AND 3.188 INCHES MAXIMUM IN
pin_overall_diameter0.4980 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.062 INCHES NOMINAL IN
material_document_and_classificationASTM A304 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A322 ASSN STD 2ND MATERIAL RESPONSE OR ASTM A331 ASSN STD 3RD MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-116-7609
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 64A98B252 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 83.0 MICROINCHES BOTH ENDS
•
FIRST END TAPER LENGTH: 0.062 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A304 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A322 ASSN STD 2ND MATERIAL RESPONSE OR ASTM A331 ASSN STD 3RD MATERIAL RESPONSE OVERALL
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.4980 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 3.157 INCHES MINIMUM AND 3.188 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TECHNICAL CHARACTERISTICS
SURFACE FINISH83.0 MICROINCHES BOTH ENDS
FIRST END TAPER LENGTH0.062 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A304 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A322 ASSN STD 2ND MATERIAL RESPONSE OR ASTM A331 ASSN STD 3RD MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.4980 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
PIN OVERALL LENGTH3.157 INCHES MINIMUM AND 3.188 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIALSTEEL COMP 4145H OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
64A98B252-1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 64A98B252?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 64A98B252?
64A98B252 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 64A98B252?
There is 1 known substitute for 64A98B252: 64A98B252-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 64A98B252?
64A98B252 is cataloged in the U.S. Government catalog under NSN 5315-00-116-7609. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 64A98B252

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.