PartsTable
Technical Data Sheet
Download PDF

64A16A317 — CATCH,CLAMPING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

64A16A317: CATCH,CLAMPING.

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include material: STEEL BODY, design_type: CLAW ENGAGING, hole_diameter: 0.097 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN, overall_width: 0.940 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN, overall_height: 0.360 INCHES NOMINAL IN, overall_length: 2.360 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-891-5506, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
64A16A317
NSN: 5340-00-891-5506
FSC: 5340 — Hardware, Commercial
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL BODY
design_typeCLAW ENGAGING
hole_diameter0.097 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
hole_quantity2
overall_width0.940 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
overall_height0.360 INCHES NOMINAL IN
overall_length2.360 INCHES NOMINAL IN
operation_methodLEVER HANDLE
style_designatorLEVER
surface_treatmentCHROMATE BASE
engaging_surface_thickness0.270 INCHES NOMINAL IN
surface_treatment_document_and_classificationMIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE BASE
NSN5340-00-891-5506
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 64A16A317 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE BASE
•
DESIGN TYPE: CLAW ENGAGING
•
STYLE DESIGNATOR: LEVER
•
SURFACE TREATMENT: CHROMATE BASE
•
ENGAGING SURFACE THICKNESS: 0.270 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.360 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE BASE
DESIGN TYPECLAW ENGAGING
STYLE DESIGNATORLEVER
OVERALL LENGTH2.360 INCHES NOMINAL IN
OVERALL WIDTH0.940 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
SURFACE TREATMENTCHROMATE BASE
ENGAGING SURFACE THICKNESS0.270 INCHES NOMINAL IN
MATERIALSTEEL BODY
MATERIALALUMINUM ALLOY BASE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
9M802-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
55P216097Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 64A16A317?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 64A16A317?
64A16A317 is a CATCH,CLAMPING.
What parts can replace 64A16A317?
There are 2 known substitutes for 64A16A317: 9M802-1, 55P216097. Substitute compatibility should be verified for your specific system.
What is the NSN for 64A16A317?
64A16A317 is cataloged in the U.S. Government catalog under NSN 5340-00-891-5506. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 64A16A317