PartsTable
Technical Data Sheet
Download PDF

64A114B95-1 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

64A114B95-1: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, shank_length: 0.062 INCHES NOMINAL IN, overall_length: 2.188 INCHES NOMINAL IN, shank_diameter: 0.312 INCHES NOMINAL IN, first_end_style: CHAMFERED, second_end_style: SQUARE. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-893-6053, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
64A114B95-1
NSN: 5315-00-893-6053
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
shank_length0.062 INCHES NOMINAL IN
overall_length2.188 INCHES NOMINAL IN
shank_diameter0.312 INCHES NOMINAL IN
first_end_styleCHAMFERED
second_end_styleSQUARE
special_featuresHOLE THD 1/4-28 UNF 3B
style_designatorSHOULDER
shoulder_diameter0.375 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
first_end_locationSHANK END
first_hole_diameter0.250 INCHES NOMINAL IN
NSN5315-00-893-6053
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 64A114B95-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.312 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.062 INCHES NOMINAL IN
•
FIRST END LOCATION: SHANK END
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.250 INCHES NOMINAL IN
•
SHANK LENGTH: 0.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SHOULDER
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.312 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.062 INCHES NOMINAL IN
FIRST END LOCATIONSHANK END
HOLE ARRANGEMENT STYLEONE END DRILLED
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.250 INCHES NOMINAL IN
SHANK LENGTH0.062 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDER
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758 COND D4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH2.188 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 64A114B95-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 64A114B95-1?
64A114B95-1 is a PIN,SHOULDER,HEADLESS.
What is the NSN for 64A114B95-1?
64A114B95-1 is cataloged in the U.S. Government catalog under NSN 5315-00-893-6053. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 64A114B95-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.